Sinterit Sandblaster

{"id":2188232392822,"title":"Sinterit Lisa SLS 3D Printer","handle":"sinterit-lisa-sls-3d-printer","description":"\u003cp\u003eSelective Laser Sintering (SLS) 3D printing enables cost-efficient printing of industrial prototypes or functional parts with a high level of detail. \u003c\/p\u003e\n\u003cp\u003eBenchtop-sized, the Lisa 3D printer is an affordable and easy to use solution for the production of complex and precise parts, using nylon or flexible materials.\u003c\/p\u003e\n\u003cp\u003eWith SLS technology, support printing is no longer required, eliminating the waste of 3D printing material and allowing complete freedom of form. \u003c\/p\u003e\n\u003cp\u003eThe Lisa can print functional, moving parts without requiring assembly or post-processing. Several models can be printed at the same time for increased productivity.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 620 x 400 x 660mm \u003cspan\u003e(24.4 x 15.7 x 26.0 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 41kg (90lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Selective Laser Sintering (SLS)\u003c\/li\u003e\n\u003cli\u003eLaser system : IR laser diode 5W\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (PA) : 90 x 130 x 130mm (3.5 x 5.1 x 5.1 inches)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (Flexa) : 110 x 150 x 150mm (\u003cspan\u003e4.3\u003c\/span\u003e\u003cspan\u003e x \u003c\/span\u003e\u003cspan\u003e5.9 \u003c\/span\u003e\u003cspan\u003ex \u003c\/span\u003e\u003cspan\u003e5.9\u003c\/span\u003e inches)\u003c\/li\u003e\n\u003cli\u003eLayer height : 75 to 175 microns (0.003 to 0.007 inches)\u003c\/li\u003e\n\u003cli\u003eXY accuracy : 0.05mm (0.002 inches)\u003c\/li\u003e\n\u003cli\u003eHeating system : independant piston, feed bed, cylinder \u0026amp; print bed heating\u003c\/li\u003e\n\u003cli\u003eMax temperature : 190°C (374°F)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : Wifi, Touchscreen, USB, Camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness : from 0.4mm (0.015 inches)\u003c\/li\u003e\n\u003cli\u003eMinimum detail size : from 0.1mm (0.003 inches)\u003c\/li\u003e\n\u003cli\u003eHole diameter : from 0.5mm (0.019 inches)\u003c\/li\u003e\n\u003cli\u003eMoving part clearance : from 0.2mm (0.007 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply : 220-240V 50\/60Hz 7A or 100-130V 50\/60Hz 15A\u003c\/li\u003e\n\u003cli\u003eAverage power consumption : 0.9kW\u003c\/li\u003e\n\u003cli\u003eMaximum power consumption : 1.6kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSinterit Studio 2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, 3DS, FBX, DAE, 3MF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2014\/05\/LISA_PRO_Specification.pdf\" target=\"_blank\" title=\"Sinterit Lisa Pro SLS 3D printer at sinterit.com\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-10-20T13:10:54-04:00","created_at":"2018-09-30T17:17:45-04:00","vendor":"Sinterit","type":"Sinterit 3D Printers","tags":["3d printer","SLS"],"price":1238500,"price_min":1238500,"price_max":1238500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19799791075446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-LIS-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sinterit Lisa SLS 3D Printer","public_title":null,"options":["Default Title"],"price":1238500,"weight":100000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-1.jpeg?v=1579896164","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-2.png?v=1579896164","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-3.png?v=1579896164","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-4.png?v=1579896166"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-1.jpeg?v=1579896164","options":["Title"],"media":[{"alt":null,"id":6013054615670,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-1.jpeg?v=1579896155"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-1.jpeg?v=1579896155","width":1200},{"alt":null,"id":6013054713974,"position":2,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-2.png?v=1579896158"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-2.png?v=1579896158","width":1000},{"alt":null,"id":6013054779510,"position":3,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-3.png?v=1579896160"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-3.png?v=1579896160","width":1000},{"alt":null,"id":6013054943350,"position":4,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-4.png?v=1579896163"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-sls-3d-printer-4.png?v=1579896163","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSelective Laser Sintering (SLS) 3D printing enables cost-efficient printing of industrial prototypes or functional parts with a high level of detail. \u003c\/p\u003e\n\u003cp\u003eBenchtop-sized, the Lisa 3D printer is an affordable and easy to use solution for the production of complex and precise parts, using nylon or flexible materials.\u003c\/p\u003e\n\u003cp\u003eWith SLS technology, support printing is no longer required, eliminating the waste of 3D printing material and allowing complete freedom of form. \u003c\/p\u003e\n\u003cp\u003eThe Lisa can print functional, moving parts without requiring assembly or post-processing. Several models can be printed at the same time for increased productivity.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 620 x 400 x 660mm \u003cspan\u003e(24.4 x 15.7 x 26.0 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 41kg (90lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Selective Laser Sintering (SLS)\u003c\/li\u003e\n\u003cli\u003eLaser system : IR laser diode 5W\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (PA) : 90 x 130 x 130mm (3.5 x 5.1 x 5.1 inches)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (Flexa) : 110 x 150 x 150mm (\u003cspan\u003e4.3\u003c\/span\u003e\u003cspan\u003e x \u003c\/span\u003e\u003cspan\u003e5.9 \u003c\/span\u003e\u003cspan\u003ex \u003c\/span\u003e\u003cspan\u003e5.9\u003c\/span\u003e inches)\u003c\/li\u003e\n\u003cli\u003eLayer height : 75 to 175 microns (0.003 to 0.007 inches)\u003c\/li\u003e\n\u003cli\u003eXY accuracy : 0.05mm (0.002 inches)\u003c\/li\u003e\n\u003cli\u003eHeating system : independant piston, feed bed, cylinder \u0026amp; print bed heating\u003c\/li\u003e\n\u003cli\u003eMax temperature : 190°C (374°F)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : Wifi, Touchscreen, USB, Camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness : from 0.4mm (0.015 inches)\u003c\/li\u003e\n\u003cli\u003eMinimum detail size : from 0.1mm (0.003 inches)\u003c\/li\u003e\n\u003cli\u003eHole diameter : from 0.5mm (0.019 inches)\u003c\/li\u003e\n\u003cli\u003eMoving part clearance : from 0.2mm (0.007 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply : 220-240V 50\/60Hz 7A or 100-130V 50\/60Hz 15A\u003c\/li\u003e\n\u003cli\u003eAverage power consumption : 0.9kW\u003c\/li\u003e\n\u003cli\u003eMaximum power consumption : 1.6kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSinterit Studio 2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, 3DS, FBX, DAE, 3MF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2014\/05\/LISA_PRO_Specification.pdf\" target=\"_blank\" title=\"Sinterit Lisa Pro SLS 3D printer at sinterit.com\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e"}

{"id":2187248664694,"title":"Sinterit Lisa PRO SLS 3D Printer","handle":"sinterit-lisa-pro-sls-3d-printer","description":"\u003cp\u003eSelective Laser Sintering (SLS) 3D printing enables cost-efficient printing of industrial prototypes or functional parts with a high level of detail. \u003c\/p\u003e\n\u003cp\u003eBenchtop-sized, the Lisa PRO 3D printer is an affordable and easy to use solution for the production of complex and precise parts, using nylon or flexible materials.\u003c\/p\u003e\n\u003cp\u003eThanks to its built-in nitrogen chamber, the Lisa PRO enables printing more materials than other SLS 3D printers. Currently, PA12 nylon, PA11 nylon, Flexa Black and Flexa Grey are available from Sinterit, and more are being developed.\u003c\/p\u003e\n\u003cp\u003eWith SLS technology, support printing is no longer required, eliminating the waste of 3D printing material and allowing complete freedom of form. \u003c\/p\u003e\n\u003cp\u003eThe Lisa PRO can print functional, moving parts without requiring assembly or post-processing. Several models can be printed at the same time for increased productivity.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 690 x 500 x 880mm \u003cspan\u003e(27.1 x 19.7 x 34.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 90kg (198lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Selective Laser Sintering (SLS)\u003c\/li\u003e\n\u003cli\u003eLaser system : IR laser diode 5W, 808nm wavelength\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (PA12, PA11) : 90 x 130 x 230mm (3.5 x 5.1 x 9 inches)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (Flexa) : 110 x 150 x 250mm (\u003cspan\u003e4.3\u003c\/span\u003e\u003cspan\u003e x 5.9\u003c\/span\u003e\u003cspan\u003e x \u003c\/span\u003e\u003cspan\u003e9.8\u003c\/span\u003e inches)\u003c\/li\u003e\n\u003cli\u003eLayer height : 75 to 175 microns (0.003 to 0.007 inches)\u003c\/li\u003e\n\u003cli\u003eXY accuracy : 0.05mm (0.002 inches)\u003c\/li\u003e\n\u003cli\u003eHeating system : independant piston, feed bed, cylinder \u0026amp; print bed heating\u003c\/li\u003e\n\u003cli\u003eMax temperature : 200°C (392°F)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : Wifi, Touchscreen, USB, Camera\u003c\/li\u003e\n\u003cli\u003eAverage nitrogen consumption : 0.15m³ \/ h\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness : from 0.4mm (0.015 inches)\u003c\/li\u003e\n\u003cli\u003eMinimum detail size : from 0.1mm (0.003 inches)\u003c\/li\u003e\n\u003cli\u003eHole diameter : from 0.5mm (0.019 inches)\u003c\/li\u003e\n\u003cli\u003eMoving part clearance : from 0.2mm (0.007 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply : 220-240V 50\/60Hz 7A or 100-130V 50\/60Hz 15A\u003c\/li\u003e\n\u003cli\u003eAverage power consumption : 1kW\u003c\/li\u003e\n\u003cli\u003eMaximum power consumption : 1.8kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSinterit Studio 2019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, 3DS, FBX, DAE, 3MF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003ePA11 Nylon\u003c\/li\u003e\n\u003cli\u003ePA11 ESD Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003cli\u003eFlexa Soft\u003c\/li\u003e\n\u003cli\u003eFlexa Bright\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePolypropylene (PP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Sinterit Lisa Pro SLS 3D printer at sinterit.com\" href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2014\/05\/LISA_PRO_Specification.pdf\" target=\"_blank\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-10-20T13:11:15-04:00","created_at":"2018-09-30T11:49:37-04:00","vendor":"Sinterit","type":"Sinterit 3D Printers","tags":["3d printer","SLS"],"price":2099900,"price_min":2099900,"price_max":2099900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19792952262774,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-LIS-PRO-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sinterit Lisa PRO SLS 3D Printer","public_title":null,"options":["Default Title"],"price":2099900,"weight":100000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-1.png?v=1579896109","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-2.jpeg?v=1579896109","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-3.jpeg?v=1579896109","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-4.png?v=1579896111"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-1.png?v=1579896109","options":["Title"],"media":[{"alt":null,"id":6013050552438,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-1.png?v=1579896100"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-1.png?v=1579896100","width":1024},{"alt":null,"id":6013050749046,"position":2,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-2.jpeg?v=1579896103"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-2.jpeg?v=1579896103","width":1000},{"alt":null,"id":6013051142262,"position":3,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-3.jpeg?v=1579896105"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-3.jpeg?v=1579896105","width":1000},{"alt":null,"id":6013051240566,"position":4,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-4.png?v=1579896108"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-lisa-pro-sls-3d-printer-4.png?v=1579896108","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSelective Laser Sintering (SLS) 3D printing enables cost-efficient printing of industrial prototypes or functional parts with a high level of detail. \u003c\/p\u003e\n\u003cp\u003eBenchtop-sized, the Lisa PRO 3D printer is an affordable and easy to use solution for the production of complex and precise parts, using nylon or flexible materials.\u003c\/p\u003e\n\u003cp\u003eThanks to its built-in nitrogen chamber, the Lisa PRO enables printing more materials than other SLS 3D printers. Currently, PA12 nylon, PA11 nylon, Flexa Black and Flexa Grey are available from Sinterit, and more are being developed.\u003c\/p\u003e\n\u003cp\u003eWith SLS technology, support printing is no longer required, eliminating the waste of 3D printing material and allowing complete freedom of form. \u003c\/p\u003e\n\u003cp\u003eThe Lisa PRO can print functional, moving parts without requiring assembly or post-processing. Several models can be printed at the same time for increased productivity.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 690 x 500 x 880mm \u003cspan\u003e(27.1 x 19.7 x 34.6 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 90kg (198lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Selective Laser Sintering (SLS)\u003c\/li\u003e\n\u003cli\u003eLaser system : IR laser diode 5W, 808nm wavelength\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (PA12, PA11) : 90 x 130 x 230mm (3.5 x 5.1 x 9 inches)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions (Flexa) : 110 x 150 x 250mm (\u003cspan\u003e4.3\u003c\/span\u003e\u003cspan\u003e x 5.9\u003c\/span\u003e\u003cspan\u003e x \u003c\/span\u003e\u003cspan\u003e9.8\u003c\/span\u003e inches)\u003c\/li\u003e\n\u003cli\u003eLayer height : 75 to 175 microns (0.003 to 0.007 inches)\u003c\/li\u003e\n\u003cli\u003eXY accuracy : 0.05mm (0.002 inches)\u003c\/li\u003e\n\u003cli\u003eHeating system : independant piston, feed bed, cylinder \u0026amp; print bed heating\u003c\/li\u003e\n\u003cli\u003eMax temperature : 200°C (392°F)\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : Wifi, Touchscreen, USB, Camera\u003c\/li\u003e\n\u003cli\u003eAverage nitrogen consumption : 0.15m³ \/ h\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness : from 0.4mm (0.015 inches)\u003c\/li\u003e\n\u003cli\u003eMinimum detail size : from 0.1mm (0.003 inches)\u003c\/li\u003e\n\u003cli\u003eHole diameter : from 0.5mm (0.019 inches)\u003c\/li\u003e\n\u003cli\u003eMoving part clearance : from 0.2mm (0.007 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply : 220-240V 50\/60Hz 7A or 100-130V 50\/60Hz 15A\u003c\/li\u003e\n\u003cli\u003eAverage power consumption : 1kW\u003c\/li\u003e\n\u003cli\u003eMaximum power consumption : 1.8kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSinterit Studio 2019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, 3DS, FBX, DAE, 3MF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003ePA11 Nylon\u003c\/li\u003e\n\u003cli\u003ePA11 ESD Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003cli\u003eFlexa Soft\u003c\/li\u003e\n\u003cli\u003eFlexa Bright\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003ePolypropylene (PP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Sinterit Lisa Pro SLS 3D printer at sinterit.com\" href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2014\/05\/LISA_PRO_Specification.pdf\" target=\"_blank\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e"}

{"id":6555765997748,"title":"Sinterit Powder Handling Station Bundle","handle":"sinterit-powder-handling-station","description":"\u003cp\u003ePost-processing and powder recovery: all processes in one place!\u003c\/p\u003e\n\u003cp\u003eThe Powder handling station is a supporting device designed to make post-processing and powder recovery as clean and efficient as possible.\u003c\/p\u003e\n\u003cp\u003ePowder handling station comes with Intertek powder vacuum cleaner and powder sifter installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction system compatible with Sinterit Intertek Vacuum Cleaner\u003c\/li\u003e\n\u003cli\u003eDedicated 3d printed vacuum inlets for depowdering\u003c\/li\u003e\n\u003cli\u003eBuilt-in LED lighting\u003c\/li\u003e\n\u003cli\u003eStorage space – 3 drawers and shelf for often using tools\u003c\/li\u003e\n\u003cli\u003eBuilt-in sieving module and powder separator\u003c\/li\u003e\n\u003cli\u003eCompatible with standard Sinterit Powder Container\u003c\/li\u003e\n\u003cli\u003eEasy cleaning\u003c\/li\u003e\n\u003cli\u003eSandblaster shelf\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eBundle pricing available - email us for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003eDimensions [mm]\/[in] 700 x 1000 x 1580 \/ 27.6 x 39.4 x 62.2\u003c\/p\u003e\n\u003cp\u003eTotal weight 160 kg \/ 352.7 lbs\u003c\/p\u003e\n\u003cp\u003eSpace of installation [mm]\/[in] 1700 x 2200 x 1800 \/ 66.9 x 86.6 x 70.9\u003c\/p\u003e\n\u003cp\u003eVoltage 230 [V] AC, 50\/60 [Hz] or 110 [V] AC 50\/60 [Hz]\u003c\/p\u003e\n\u003cp\u003ePower supply 110\/230 V AC, 12 VDC 6.67 A, 80W\u003c\/p\u003e","published_at":"2021-03-26T12:47:24-04:00","created_at":"2021-03-10T13:31:34-05:00","vendor":"Sinterit","type":"Sinterit 3D Printers","tags":["post-processing","powder handling","sinterit addons"],"price":1238500,"price_min":1238500,"price_max":1238500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39349452112052,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-PHS-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sinterit Powder Handling Station Bundle","public_title":null,"options":["Default Title"],"price":1238500,"weight":160000,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_9.jpg?v=1615401351","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_8.jpg?v=1615401356"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_9.jpg?v=1615401351","options":["Title"],"media":[{"alt":null,"id":20379519451316,"position":1,"preview_image":{"aspect_ratio":1.778,"height":1152,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_9.jpg?v=1615401351"},"aspect_ratio":1.778,"height":1152,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_9.jpg?v=1615401351","width":2048},{"alt":null,"id":20379519975604,"position":2,"preview_image":{"aspect_ratio":1.778,"height":1152,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_8.jpg?v=1615401356"},"aspect_ratio":1.778,"height":1152,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PHS-PowderHandlingStation_8.jpg?v=1615401356","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003ePost-processing and powder recovery: all processes in one place!\u003c\/p\u003e\n\u003cp\u003eThe Powder handling station is a supporting device designed to make post-processing and powder recovery as clean and efficient as possible.\u003c\/p\u003e\n\u003cp\u003ePowder handling station comes with Intertek powder vacuum cleaner and powder sifter installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction system compatible with Sinterit Intertek Vacuum Cleaner\u003c\/li\u003e\n\u003cli\u003eDedicated 3d printed vacuum inlets for depowdering\u003c\/li\u003e\n\u003cli\u003eBuilt-in LED lighting\u003c\/li\u003e\n\u003cli\u003eStorage space – 3 drawers and shelf for often using tools\u003c\/li\u003e\n\u003cli\u003eBuilt-in sieving module and powder separator\u003c\/li\u003e\n\u003cli\u003eCompatible with standard Sinterit Powder Container\u003c\/li\u003e\n\u003cli\u003eEasy cleaning\u003c\/li\u003e\n\u003cli\u003eSandblaster shelf\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eBundle pricing available - email us for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003eDimensions [mm]\/[in] 700 x 1000 x 1580 \/ 27.6 x 39.4 x 62.2\u003c\/p\u003e\n\u003cp\u003eTotal weight 160 kg \/ 352.7 lbs\u003c\/p\u003e\n\u003cp\u003eSpace of installation [mm]\/[in] 1700 x 2200 x 1800 \/ 66.9 x 86.6 x 70.9\u003c\/p\u003e\n\u003cp\u003eVoltage 230 [V] AC, 50\/60 [Hz] or 110 [V] AC 50\/60 [Hz]\u003c\/p\u003e\n\u003cp\u003ePower supply 110\/230 V AC, 12 VDC 6.67 A, 80W\u003c\/p\u003e"}

{"id":6074751385780,"title":"Atex Vacuum Cleaner Pack (Vacuum \u0026 Separator)","handle":"atex-vacuum-cleaner-pack-vacuum-separator","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003ch1 style=\"font-size: 32px; text-align: center;\" center=\"\" text-align:=\"\"\u003e\u003cspan style=\"color: #223a51;\"\u003eSinterit\u003cbr\u003e ATEX Vacuum Cleaner\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eA perfect solution for efficient collecting and cleaning unsintered powder. The compact dimensions of the device along with high collection capacity is crucial if you have limited space. Along with the cyclone powder separator it will make your workflow much faster and easier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e440 x 420 x 780 [mm] (17.3 x 16.5 x 30.7 [in])\u003c\/li\u003e\n\u003cli\u003e25 [kg] (55 [lbs])\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 class=\"vc_custom_heading vc_custom_1591619775438\" style=\"font-size: 32px; color: #063751; text-align: center; font-family: Open Sans; font-weight: bold; font-style: normal;\"\u003e\u003cstrong\u003ePowder Separator\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis separator is designed by our R\u0026amp;D team especially for SLS and Sinterit’s printers – this highly effective separator helps you recover all of the unsintered powder and use it again in the next print job. All unsintered powder from the print can be put into a dedicated 12L container. Then the vacuum can be used in a traditional way to clean the workspace. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions 550 x 305 x 300 [mm] (21,7 x 12 x 11,8 [in])\u003c\/li\u003e\n\u003cli\u003eTotal weight 5 [kg] (11 [lbs])\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVacuum Technical Details\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e 1.1 [kW]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e230 [V] AC, 50\/60 [Hz] or 110 [V] AC 50\/60 [Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level\u003c\/strong\u003e (EN ISO 3744) 77 [dB(A)]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. air flow\u003c\/strong\u003e (rate) 215 [m\u003csup\u003e3\u003c\/sup\u003e\/h]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction inlet\u003c\/strong\u003e 50 [mm]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter type\u003c\/strong\u003e Star, M class filtration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity of the collection unit\u003c\/strong\u003e 40 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX zones\u003c\/strong\u003e Z22 or INTERTEK certification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e ATEX Vacuum Cleaner + set of accessories + powder separator + manuals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Atex-Vacuum-cleaner-SPECIFICATION.pdf\"\u003eFull Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSeparator Technical Details\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. air flow (rate) 215 [m3\/h]\u003c\/li\u003e\n\u003cli\u003eSuction outlet 32 [mm] (13 [in])\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity of collection unit 12 [L]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize of package 400 x 400 x 400 [mm] (15.74 x 15.74 x 15.74 [in])\u003c\/li\u003e\n\u003cli\u003ePackage weight 6 [kg] (13.2 [lbs])\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage contains Sinterit Separator + set of accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDatasheets\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Atex-Vacuum-cleaner-SPECIFICATION.pdf\"\u003eVacuum Full Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Powder-Separator-SPECIFICATION.pdf\"\u003eSeparator Full Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e","published_at":"2021-01-15T19:42:50-05:00","created_at":"2020-11-12T17:38:46-05:00","vendor":"Sinterit","type":"Sinterit 3D Printers","tags":["add-on","Lisa","Lisa PRO","SLS"],"price":432500,"price_min":432500,"price_max":432500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37515893899444,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-ATX-VAC-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Atex Vacuum Cleaner Pack (Vacuum \u0026 Separator)","public_title":null,"options":["Default Title"],"price":432500,"weight":30000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-atex-vacuum-cleaner-pack-vacuum-separator-1.jpg?v=1611273607"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-atex-vacuum-cleaner-pack-vacuum-separator-1.jpg?v=1611273607","options":["Title"],"media":[{"alt":"Sinterit 3D Printers - Atex Vacuum Cleaner Pack (Vacuum \u0026 Separator)","id":15983227732148,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-atex-vacuum-cleaner-pack-vacuum-separator-1.jpg?v=1611273604"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-atex-vacuum-cleaner-pack-vacuum-separator-1.jpg?v=1611273604","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\u003c\/ul\u003e\n\u003ch1 style=\"font-size: 32px; text-align: center;\" center=\"\" text-align:=\"\"\u003e\u003cspan style=\"color: #223a51;\"\u003eSinterit\u003cbr\u003e ATEX Vacuum Cleaner\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eA perfect solution for efficient collecting and cleaning unsintered powder. The compact dimensions of the device along with high collection capacity is crucial if you have limited space. Along with the cyclone powder separator it will make your workflow much faster and easier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e440 x 420 x 780 [mm] (17.3 x 16.5 x 30.7 [in])\u003c\/li\u003e\n\u003cli\u003e25 [kg] (55 [lbs])\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 class=\"vc_custom_heading vc_custom_1591619775438\" style=\"font-size: 32px; color: #063751; text-align: center; font-family: Open Sans; font-weight: bold; font-style: normal;\"\u003e\u003cstrong\u003ePowder Separator\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis separator is designed by our R\u0026amp;D team especially for SLS and Sinterit’s printers – this highly effective separator helps you recover all of the unsintered powder and use it again in the next print job. All unsintered powder from the print can be put into a dedicated 12L container. Then the vacuum can be used in a traditional way to clean the workspace. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions and Weight:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions 550 x 305 x 300 [mm] (21,7 x 12 x 11,8 [in])\u003c\/li\u003e\n\u003cli\u003eTotal weight 5 [kg] (11 [lbs])\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVacuum Technical Details\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e 1.1 [kW]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e230 [V] AC, 50\/60 [Hz] or 110 [V] AC 50\/60 [Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level\u003c\/strong\u003e (EN ISO 3744) 77 [dB(A)]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. air flow\u003c\/strong\u003e (rate) 215 [m\u003csup\u003e3\u003c\/sup\u003e\/h]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction inlet\u003c\/strong\u003e 50 [mm]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter type\u003c\/strong\u003e Star, M class filtration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity of the collection unit\u003c\/strong\u003e 40 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX zones\u003c\/strong\u003e Z22 or INTERTEK certification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e ATEX Vacuum Cleaner + set of accessories + powder separator + manuals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Atex-Vacuum-cleaner-SPECIFICATION.pdf\"\u003eFull Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSeparator Technical Details\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. air flow (rate) 215 [m3\/h]\u003c\/li\u003e\n\u003cli\u003eSuction outlet 32 [mm] (13 [in])\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity of collection unit 12 [L]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize of package 400 x 400 x 400 [mm] (15.74 x 15.74 x 15.74 [in])\u003c\/li\u003e\n\u003cli\u003ePackage weight 6 [kg] (13.2 [lbs])\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage contains Sinterit Separator + set of accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDatasheets\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Atex-Vacuum-cleaner-SPECIFICATION.pdf\"\u003eVacuum Full Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-Powder-Separator-SPECIFICATION.pdf\"\u003eSeparator Full Specification [PDF]\u003c\/a\u003e\u003c\/p\u003e"}

{"id":2187352899702,"title":"Sinterit Powder Sieve","handle":"sinterit-powder-sieve","description":"\u003cp\u003eThe powder sieve cleans your SLS powder to be re-used with future prints. Clean the material with the sieve, mix with fresh powder and print again on your Lisa or Lisa Pro SLS 3D printer.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 338 x 330 x 610mm (13.3 x 13.0 x 24.0 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 21.2kg (46.6lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity : 5L\u003c\/li\u003e\n\u003cli\u003eSieving time : 18 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003cli\u003e3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/sinterit-powder-sieve\/\" target=\"_blank\" title=\"Sinterit powder sieve at sinterit.com\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e","published_at":"2018-10-20T13:12:01-04:00","created_at":"2018-09-30T12:35:17-04:00","vendor":"Sinterit","type":"Sinterit 3D Printers","tags":["3d printer","SLS"],"price":199900,"price_min":199900,"price_max":199900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19793944182902,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-SIV-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sinterit Powder Sieve","public_title":null,"options":["Default Title"],"price":199900,"weight":23000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-powder-sieve-1.jpeg?v=1579896113"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-powder-sieve-1.jpeg?v=1579896113","options":["Title"],"media":[{"alt":null,"id":6013051371638,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-powder-sieve-1.jpeg?v=1579896110"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/sinterit-3d-printers-sinterit-powder-sieve-1.jpeg?v=1579896110","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe powder sieve cleans your SLS powder to be re-used with future prints. Clean the material with the sieve, mix with fresh powder and print again on your Lisa or Lisa Pro SLS 3D printer.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 338 x 330 x 610mm (13.3 x 13.0 x 24.0 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 21.2kg (46.6lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity : 5L\u003c\/li\u003e\n\u003cli\u003eSieving time : 18 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePA12 Nylon\u003c\/li\u003e\n\u003cli\u003eFlexa Black\u003c\/li\u003e\n\u003cli\u003eFlexa Gray\u003c\/li\u003e\n\u003cli\u003e3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sinterit.com\/sinterit-powder-sieve\/\" target=\"_blank\" title=\"Sinterit powder sieve at sinterit.com\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e"}

{"id":6214014271668,"title":"Sinterit XL Sandblaster","handle":"sinterit-xl-sandblaster","description":"\u003cdiv class=\"wpb_text_column wpb_content_element vc_custom_1585825582885\"\u003e\n\u003cdiv class=\"ewf-wrapper\"\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eThe Sinterit XL Cabin sandblaster is a universal solution for the process of blasting 3D printed parts. It allows you to clean small gaps, details and polish the surface. In Sandblaster XL \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eyou can choose between a handheld blaster and a fixed nozzle, so you can use both hands to manipulate the object.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eThe built-in pressure meter will help you to set all the work parameters precisely. The right pressure is important especially if you’re post-processing elements with tiny details\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eColour could be red or sand (depends on batch from factory)\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e760 x 500 x 720 [mm] (29.9 x 19.7 x 28.3 [in])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e 27 kg] (59.5 [lbs])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 675 x 450 x 415 [mm] (26.6 x 17.7 x 16.3 [in])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWorking pressure:\u003c\/strong\u003e 5.0 – 8.6 bar (72.5 – 125.0 psi)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply AC:\u003c\/strong\u003e\u003cspan style=\"font-size: 16.6667px;\" data-mce-style=\"font-size: 16.6667px;\"\u003e 230 \/ 110 [V] AC. 50\/60 [Hz]\u003cspan style=\"left: 505.759px; top: 876.48px; font-family: sans-serif; transform: scaleX(0.976023);\" data-mce-fragment=\"1\" data-mce-style=\"left: 505.759px; top: 876.48px; font-family: sans-serif; transform: scaleX(0.976023);\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Pressure:\u003c\/strong\u003e 5.0 – 8.6 [bar] (72.5 – 125.0 [psi]\u003c\/p\u003e\n\u003cp\u003e\u003ca role=\"link\" href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-SANDBLASTER-XL-SPECIFICATION.pdf\" data-mce-href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-SANDBLASTER-XL-SPECIFICATION.pdf\"\u003eFull specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePackaging\u003c\/h5\u003e\n\u003cp\u003eSize of package 760 x 500 x 720 [mm] ( 29.9 x 19.7 x 28 [in])\u003cbr\u003ePackage weight 40 [kg] (88.2 [lbs])\u003cbr\u003ePackage contents Sandblaster + 8 [kg] (17 [lbs]) of Abrasive material + User Manual\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccessories\u003cbr\u003ePOWER\u003cbr\u003ePower supply 120 [V] \/ 60 [Hz]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-04-01T16:41:55-04:00","created_at":"2021-02-05T18:40:20-05:00","vendor":"Sinterit","type":"Sinterit Parts","tags":["sand","sandblaster","sinterit addons"],"price":114500,"price_min":114500,"price_max":114500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38063385247924,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STR-3DP-SDB-XL0-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sinterit XL Sandblaster","public_title":null,"options":["Default Title"],"price":114500,"weight":27000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl.jpg?v=1617309681","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl-Beige.jpg?v=1617309689"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl.jpg?v=1617309681","options":["Title"],"media":[{"alt":null,"id":20639698059444,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl.jpg?v=1617309681"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl.jpg?v=1617309681","width":1400},{"alt":null,"id":20639699009716,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl-Beige.jpg?v=1617309689"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-sandblaster-xl-Beige.jpg?v=1617309689","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"wpb_text_column wpb_content_element vc_custom_1585825582885\"\u003e\n\u003cdiv class=\"ewf-wrapper\"\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eThe Sinterit XL Cabin sandblaster is a universal solution for the process of blasting 3D printed parts. It allows you to clean small gaps, details and polish the surface. In Sandblaster XL \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eyou can choose between a handheld blaster and a fixed nozzle, so you can use both hands to manipulate the object.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eThe built-in pressure meter will help you to set all the work parameters precisely. The right pressure is important especially if you’re post-processing elements with tiny details\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eColour could be red or sand (depends on batch from factory)\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e760 x 500 x 720 [mm] (29.9 x 19.7 x 28.3 [in])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e 27 kg] (59.5 [lbs])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 675 x 450 x 415 [mm] (26.6 x 17.7 x 16.3 [in])\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWorking pressure:\u003c\/strong\u003e 5.0 – 8.6 bar (72.5 – 125.0 psi)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply AC:\u003c\/strong\u003e\u003cspan style=\"font-size: 16.6667px;\" data-mce-style=\"font-size: 16.6667px;\"\u003e 230 \/ 110 [V] AC. 50\/60 [Hz]\u003cspan style=\"left: 505.759px; top: 876.48px; font-family: sans-serif; transform: scaleX(0.976023);\" data-mce-fragment=\"1\" data-mce-style=\"left: 505.759px; top: 876.48px; font-family: sans-serif; transform: scaleX(0.976023);\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Pressure:\u003c\/strong\u003e 5.0 – 8.6 [bar] (72.5 – 125.0 [psi]\u003c\/p\u003e\n\u003cp\u003e\u003ca role=\"link\" href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-SANDBLASTER-XL-SPECIFICATION.pdf\" data-mce-href=\"https:\/\/www.sinterit.com\/wp-content\/uploads\/2020\/04\/Sinterit-SANDBLASTER-XL-SPECIFICATION.pdf\"\u003eFull specification [PDF]\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePackaging\u003c\/h5\u003e\n\u003cp\u003eSize of package 760 x 500 x 720 [mm] ( 29.9 x 19.7 x 28 [in])\u003cbr\u003ePackage weight 40 [kg] (88.2 [lbs])\u003cbr\u003ePackage contents Sandblaster + 8 [kg] (17 [lbs]) of Abrasive material + User Manual\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccessories\u003cbr\u003ePOWER\u003cbr\u003ePower supply 120 [V] \/ 60 [Hz]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":6585668665524,"title":"Dedicated Powder Tools for Lisa Pro","handle":"dedicated-powder-tools-for-lisa-pro","description":"\u003cdiv class=\"wpb_text_column wpb_content_element vc_custom_1599823825696\"\u003e\n\u003cdiv class=\"ewf-wrapper\"\u003e\n\u003cp\u003eWith this comprehensive set of powder tools, you will save both time and powder, while keeping your workspace nice and tidy. Since now, your on-print preparation could be twice as fast.\u003c\/p\u003e\n\u003cp\u003eNew powder tools cover the whole printing process, from the initial startup, through taking out the printouts, post-processing, and cleaning, both the printouts and workspace. With the service kit, you get a 360° SLS printing experience. Now there is all you need to act professionally.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eService Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe attached service kit with all maintenance parts will keep your printer working for 1000 hours. Spare recoater cords, silicone oil, set of cleaning wipes, cotton cloths, and spare heaters supplies will make you prepared for any typical maintenance action.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003ePowder tools set\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePowder funnel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSimple solutions are often the best. We have tested countless powder-in systems, and we are sure that the Powder Funnel will give you the best results and versatility. It allows you to fill the printer without spraying the powder in the air. One more thing – Powder Funnel is compatible with the new powder container, Sinterit Sieve, and Powder Separator in the ATEX Vacuum Cleaner.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePersonal protection set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePowder management set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePost processing set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBinder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cem\u003eIt is not only foldable and light, so very easy to store but has an optimal workspace for initial post-processing. Most SLS 3D printing users don’t have dedicated, portable working space for “dirty work”, easy to bend, and clean. Foldable Tray is a perfect solution. You can easily vacuum it or just simply pour the powder into a bucket\u003c\/em\u003e. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-03-29T19:53:01-04:00","created_at":"2021-03-29T19:15:29-04:00","vendor":"Sinterit","type":"Sinterit Parts","tags":["sinterit addons"],"price":42500,"price_min":42500,"price_max":42500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39501140754612,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SIN-PWD-TLS-KIT-PRO","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dedicated Powder Tools for Lisa Pro","public_title":null,"options":["Default Title"],"price":42500,"weight":8000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/P1199614-2048x2048.jpg?v=1617059730"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/P1199614-2048x2048.jpg?v=1617059730","options":["Title"],"media":[{"alt":null,"id":20605530112180,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/P1199614-2048x2048.jpg?v=1617059730"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/P1199614-2048x2048.jpg?v=1617059730","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"wpb_text_column wpb_content_element vc_custom_1599823825696\"\u003e\n\u003cdiv class=\"ewf-wrapper\"\u003e\n\u003cp\u003eWith this comprehensive set of powder tools, you will save both time and powder, while keeping your workspace nice and tidy. Since now, your on-print preparation could be twice as fast.\u003c\/p\u003e\n\u003cp\u003eNew powder tools cover the whole printing process, from the initial startup, through taking out the printouts, post-processing, and cleaning, both the printouts and workspace. With the service kit, you get a 360° SLS printing experience. Now there is all you need to act professionally.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eService Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe attached service kit with all maintenance parts will keep your printer working for 1000 hours. Spare recoater cords, silicone oil, set of cleaning wipes, cotton cloths, and spare heaters supplies will make you prepared for any typical maintenance action.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem\u003ePowder tools set\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePowder funnel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSimple solutions are often the best. We have tested countless powder-in systems, and we are sure that the Powder Funnel will give you the best results and versatility. It allows you to fill the printer without spraying the powder in the air. One more thing – Powder Funnel is compatible with the new powder container, Sinterit Sieve, and Powder Separator in the ATEX Vacuum Cleaner.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePersonal protection set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePowder management set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePost processing set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBinder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cem\u003eIt is not only foldable and light, so very easy to store but has an optimal workspace for initial post-processing. Most SLS 3D printing users don’t have dedicated, portable working space for “dirty work”, easy to bend, and clean. Foldable Tray is a perfect solution. You can easily vacuum it or just simply pour the powder into a bucket\u003c\/em\u003e. \u003c\/span\u003e\u003c\/p\u003e"}