{"id":3956271153270,"title":"Station de gestion de matériaux Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":512865,"price_min":512865,"price_max":512865,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Station de gestion de matériaux Ultimaker S5","public_title":null,"options":["Default Title"],"price":512865,"weight":20000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874980999","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","options":["Title"],"media":[{"alt":null,"id":29047547035884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","width":1400},{"alt":null,"id":29047547265260,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","width":1400},{"alt":null,"id":29047547363564,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

Station de gestion de matériaux Ultimaker S5

Produit Précédent | Produit Suivant

Description du produit

Sku: UMK-3DP-MHS-US5-000

Vendeur: Ultimaker

$5,128.65

La quantité maximale disponible est atteinte.

Étiquette : add-on s5 ultimaker ultimaker s5

Description
Spécifications

Faites encore plus avec votre Ultimaker S5 grâce à la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.

Principales caractéristiques :

Chargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.
Impression continue : changement automatique de bobine lorsqu'une est vide.
Contrôle de l'humidité : avec la gestion intelligente de l'atmosphère interne et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.
Facile à installer et à contrôler : reconnaissance des matériaux Ultimaker par puce NFC, intégration complète à Cura
Compatible avec les matériaux composites (fibre de carbone ou de verre)
Compatible avec les matériaux Ultimaker et de tiers partis

Dimensions physiques : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)
Poids net: 17.7kg
Diamètre du filament: 2.85mm
Dimensions des bobines:

Largeur: 50 - 70 mm (2 - 2.7 po)
Diamètre: 197 - 203 mm (7.8 - 8 po)
Diamètre de l'ouverture: > 98 mm (3.8 po)

Capacité : 6 bobines
Reconnaissance des matériaux : reconnaissance automatique avec lecteur NFC
Type d'extrudeur : double engrenage, résistant à l'abrasion
Connection données: UMB (inclus)
Courant entrant : 85 - 264V AC, max 125W
Courant sortant : max 10A (pour Ultimaker S5)
Imprimante 3D compatible : Ultimaker S5
Intégration logicielle : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud

Produits Connexes

Polymaker Polyterra PLA 1.75mm 1kg

EN STOCK : 528

De $25.99

Polymaker PolyLite PLA 1.75mm 1kg

EN STOCK : 67

$27.99

3DLac pour adhésion au verre d'ABS robuste (et plus)

EN STOCK : 0

$9.99

{"id":355423505,"title":"3DLac pour adhésion au verre d'ABS robuste (et plus)","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003eLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du\u0026nbsp;\u003ca href=\"\/fr\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\u003c\/p\u003e\u003cp\u003e\r\n\t\u003cspan style=\"color: #990000;\"\u003e\u003cstrong\u003e*** VEUILLEZ NOTER QUE LE 3DLAC NE PEUT ÊTRE LIVRÉ QU'À L'INTÉRIEUR DU CANADA PAR FEDEX GROUND OU UN DES SERVICES DE POSTE CANADA. Toute commande incluant ce produit par livraison FEDEX EXPRESS\u0026nbsp;ou à l'extérieur du Canada sera annulée. *** \u003c\/strong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePour une livraison expresse (par avion) choisissez plutôt le\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, dont le contenu n'est pas sous pression.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume :\u0026nbsp;\u003cstrong\u003e400mL\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool\u0026nbsp;Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll\u0026nbsp;Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal,\u0026nbsp;Amyl cinnamal)\r\n\u003c\/p\u003e","published_at":"2022-04-12T14:53:10-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3DLac pour adhésion au verre d'ABS robuste (et plus)","public_title":null,"options":["Default Title"],"price":999,"weight":500,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","options":["Title"],"media":[{"alt":null,"id":29007220310252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du\u0026nbsp;\u003ca href=\"\/fr\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\u003c\/p\u003e\u003cp\u003e\r\n\t\u003cspan style=\"color: #990000;\"\u003e\u003cstrong\u003e*** VEUILLEZ NOTER QUE LE 3DLAC NE PEUT ÊTRE LIVRÉ QU'À L'INTÉRIEUR DU CANADA PAR FEDEX GROUND OU UN DES SERVICES DE POSTE CANADA. Toute commande incluant ce produit par livraison FEDEX EXPRESS\u0026nbsp;ou à l'extérieur du Canada sera annulée. *** \u003c\/strong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePour une livraison expresse (par avion) choisissez plutôt le\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, dont le contenu n'est pas sous pression.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume :\u0026nbsp;\u003cstrong\u003e400mL\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool\u0026nbsp;Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll\u0026nbsp;Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal,\u0026nbsp;Amyl cinnamal)\r\n\u003c\/p\u003e"}

3DLac pour adhésion au verre d'ABS robuste (et plus)

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...

Kit DIY Prusa i3 MK3S+ Original

EN STOCK : 0

$999.00

{"id":6094472937652,"title":"Kit DIY Prusa i3 MK3S+ Original","handle":"original-prusa-i3-mk3s-plus-diy-kit","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA St-Hubert : INCONNU -\u0026nbsp;EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA Burnaby : INCONNU - EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrusa i3 MK3S+ Originale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUne toute nouvelle sonde\u0026nbsp;SuperPINDA ainsi que quelques petits changements. Les axes\u0026nbsp;X et Y ont été légèrement améliorés, les pièces en plastique et les boulons en U ont été remplacés par des clips métalliques qui sont maintenant plus facile à monter. De plus, un certain nombre de modifications mineures ont été apportées aux pièces en plastique de l'extrudeuse afin d'améliorer la fiabilité globale.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eArticle de blog soulignant les nouveaux changements ici\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong style=\"background-color: initial;\"\u003eFilament PLA Prusa\u0026nbsp;Silver inclus !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eKit DIY – Assemblage requis, outils inclus, aucune soudure requise.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTous les kits d'imprimante sont maintenant livrés avec la plaque d'acier recouvert de PEI lisse.\u0026nbsp;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Originale Prusa design i3 MK3S+\u003c\/strong\u003e, par Josef Prusa, le célèbre développeur d'imprimante 3D RepRap de la République Tchèque.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eCe kit d'imprimante\u0026nbsp;DIY peut utiliser une large gamme de filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFacile à mettre à niveau\u003c\/strong\u003e, c'est l'imprimante parfaite pour les\u0026nbsp;\"Makers\" qui aiment modifier et personnaliser leur propre machine.\u003c\/p\u003e\n\u003cp\u003eToutes les pièces de cette imprimante\u0026nbsp;3D sont\u0026nbsp;Open Source et font partie du projet RepRap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaractéristiques :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrage automatique\u0026nbsp;XYZ\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eNivellement automatique du lit en plusieurs points.\u003c\/li\u003e\n\u003cli\u003eCapteur de filament\u003c\/li\u003e\n\u003cli\u003ePlaque d'impression\u003cstrong\u003e\u0026nbsp;lisse, amovible, à\u0026nbsp;double face\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLe lit chauffant magnétique MK52 est amovible et les pièces se détachent facilement\u003c\/li\u003e\n\u003cli\u003eSonde PINDA et thermistances de température ambiante pour une plus grande précision\u003c\/li\u003e\n\u003cli\u003eVentilateur de refroidissement Noctua silencieux avec détection du régime pour éviter les erreurs\u003c\/li\u003e\n\u003cli\u003ePrêt pour Octoprint\u003c\/li\u003e\n\u003cli\u003eNouveau pignon d'entraînement Bondtech\u003c\/li\u003e\n\u003cli\u003eLes pilotes Trinamic2130 détectent les pas perdus, pour corriger le décalage des couches\u003c\/li\u003e\n\u003cli\u003eVitesse d'impression jusqu'à 200mm\/s !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCaractéristiques de la\u0026nbsp;Mk3S+\u0026nbsp;\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNouveau SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNouvelles pièces d'extrudeur imprimées\u003c\/li\u003e\n\u003cli\u003eNouveaux Bearing Clips pour les roulements de l'axe Y\u003c\/li\u003e\n\u003cli\u003eNouveau capteur de filament IR + câble\u003c\/li\u003e\n\u003cli\u003eNouveau tube d'extrudeur en PTFE\u003c\/li\u003e\n\u003cli\u003eCouvercle de ventilateur imprimé en ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eListe complète des caractéristiques avec explications ici\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions et poids\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions extérieures\u0026nbsp;: \u0026nbsp;42 x 42 x 39 cm (16.5 x 16.5 x 15.1 pouces)\n\u003c\/li\u003e\n\u003cli\u003ePoids: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImpression\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnologie : Fabrication de filaments fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\n\u003cli\u003eDimensions de la structure : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 pouces)\u003c\/li\u003e\n\u003cli\u003eVolume de construction : 11 025 cm3 (675 pouces3)\u003c\/li\u003e\n\u003cli\u003eHauteur des couches : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eDiamètre du filament : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 300°C\u003c\/li\u003e\n\u003cli\u003eSurface d'impression : \u003cstrong\u003ePEI texturé, lisse ou satin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\n\u003ch3\u003eTranchage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContrôle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eMatériaux flexibles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026_sid=9db733b92\u0026_ss=r\"\u003eFibre de carbone\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026_sid=7b0a21242\u0026_ss=r\"\u003e\u003cstrong\u003eFibre de verre\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePlus d'informations\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eInstructions de montage sur prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eAnnonce officielle sur prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eAnnonce de la Mk3S+ sur\u0026nbsp;prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-11-26T20:29:13-05:00","created_at":"2020-11-26T12:45:41-05:00","vendor":"Prusa Research","type":"Prusa Research 3D Printers","tags":["3Dprinters","DIY","MK3S+","prusa","RepRap"],"price":99900,"price_min":99900,"price_max":99900,"available":false,"price_varies":false,"compare_at_price":104900,"compare_at_price_min":104900,"compare_at_price_max":104900,"compare_at_price_varies":false,"variants":[{"id":37604402102452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-3DP-I3M-K3S-PLS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kit DIY Prusa i3 MK3S+ Original","public_title":null,"options":["Default Title"],"price":99900,"weight":11800,"compare_at_price":104900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","options":["Title"],"media":[{"alt":null,"id":29017280610540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","width":1400},{"alt":null,"id":29017280970988,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","width":1400},{"alt":null,"id":29017281200364,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA St-Hubert : INCONNU -\u0026nbsp;EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eETA Burnaby : INCONNU - EN RUPTURE DE STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrusa i3 MK3S+ Originale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUne toute nouvelle sonde\u0026nbsp;SuperPINDA ainsi que quelques petits changements. Les axes\u0026nbsp;X et Y ont été légèrement améliorés, les pièces en plastique et les boulons en U ont été remplacés par des clips métalliques qui sont maintenant plus facile à monter. De plus, un certain nombre de modifications mineures ont été apportées aux pièces en plastique de l'extrudeuse afin d'améliorer la fiabilité globale.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eArticle de blog soulignant les nouveaux changements ici\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong style=\"background-color: initial;\"\u003eFilament PLA Prusa\u0026nbsp;Silver inclus !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eKit DIY – Assemblage requis, outils inclus, aucune soudure requise.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTous les kits d'imprimante sont maintenant livrés avec la plaque d'acier recouvert de PEI lisse.\u0026nbsp;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Originale Prusa design i3 MK3S+\u003c\/strong\u003e, par Josef Prusa, le célèbre développeur d'imprimante 3D RepRap de la République Tchèque.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eCe kit d'imprimante\u0026nbsp;DIY peut utiliser une large gamme de filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFacile à mettre à niveau\u003c\/strong\u003e, c'est l'imprimante parfaite pour les\u0026nbsp;\"Makers\" qui aiment modifier et personnaliser leur propre machine.\u003c\/p\u003e\n\u003cp\u003eToutes les pièces de cette imprimante\u0026nbsp;3D sont\u0026nbsp;Open Source et font partie du projet RepRap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaractéristiques :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrage automatique\u0026nbsp;XYZ\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eNivellement automatique du lit en plusieurs points.\u003c\/li\u003e\n\u003cli\u003eCapteur de filament\u003c\/li\u003e\n\u003cli\u003ePlaque d'impression\u003cstrong\u003e\u0026nbsp;lisse, amovible, à\u0026nbsp;double face\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLe lit chauffant magnétique MK52 est amovible et les pièces se détachent facilement\u003c\/li\u003e\n\u003cli\u003eSonde PINDA et thermistances de température ambiante pour une plus grande précision\u003c\/li\u003e\n\u003cli\u003eVentilateur de refroidissement Noctua silencieux avec détection du régime pour éviter les erreurs\u003c\/li\u003e\n\u003cli\u003ePrêt pour Octoprint\u003c\/li\u003e\n\u003cli\u003eNouveau pignon d'entraînement Bondtech\u003c\/li\u003e\n\u003cli\u003eLes pilotes Trinamic2130 détectent les pas perdus, pour corriger le décalage des couches\u003c\/li\u003e\n\u003cli\u003eVitesse d'impression jusqu'à 200mm\/s !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCaractéristiques de la\u0026nbsp;Mk3S+\u0026nbsp;\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNouveau SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNouvelles pièces d'extrudeur imprimées\u003c\/li\u003e\n\u003cli\u003eNouveaux Bearing Clips pour les roulements de l'axe Y\u003c\/li\u003e\n\u003cli\u003eNouveau capteur de filament IR + câble\u003c\/li\u003e\n\u003cli\u003eNouveau tube d'extrudeur en PTFE\u003c\/li\u003e\n\u003cli\u003eCouvercle de ventilateur imprimé en ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eListe complète des caractéristiques avec explications ici\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions et poids\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions extérieures\u0026nbsp;: \u0026nbsp;42 x 42 x 39 cm (16.5 x 16.5 x 15.1 pouces)\n\u003c\/li\u003e\n\u003cli\u003ePoids: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImpression\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnologie : Fabrication de filaments fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\n\u003cli\u003eDimensions de la structure : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 pouces)\u003c\/li\u003e\n\u003cli\u003eVolume de construction : 11 025 cm3 (675 pouces3)\u003c\/li\u003e\n\u003cli\u003eHauteur des couches : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eDiamètre du filament : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 300°C\u003c\/li\u003e\n\u003cli\u003eSurface d'impression : \u003cstrong\u003ePEI texturé, lisse ou satin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\n\u003ch3\u003eTranchage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContrôle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eMatériaux flexibles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026_sid=9db733b92\u0026_ss=r\"\u003eFibre de carbone\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026_sid=7b0a21242\u0026_ss=r\"\u003e\u003cstrong\u003eFibre de verre\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePlus d'informations\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eInstructions de montage sur prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eAnnonce officielle sur prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eAnnonce de la Mk3S+ sur\u0026nbsp;prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e"}

Kit DIY Prusa i3 MK3S+ Original

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$999.00

ETA St-Hubert : INCONNU - EN RUPTURE DE STOCK ETA Burnaby : INCONNU - EN RUPTURE DE STOCK SIGNATURE REQUISE À LA LIVRAISON - VOUS DEVREZ PEUT-ÊTRE ALLER LE CHERCHER À VOTRE BUREAU DE POSTE LOCAL SI VOUS N'ÊTES PAS CHEZ VOUS LE JOUR DE LA LIVRAISON. Prusa i3 MK3S+ Originale Une toute nouvelle sonde SuperPINDA ainsi que quelques petits c...

Polymaker PolyLite PETG 1.75mm 1kg

EN STOCK : 202

De $27.99

Solution d'adhésion 3DLAC Plus 100mL

EN STOCK : 13

$9.99

{"id":3874371698806,"title":"Solution d'adhésion 3DLAC Plus 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003e\r\n\tLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du \r\n\t\u003ca href=\"https:\/\/langify-app.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContrairement au\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLAC classique\u003c\/a\u003e, le contenu n'est pas sous pression, et donc plus sûr pour le transport, notamment aérien.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume : \r\n\t\u003cstrong\u003e100mL\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\r\n\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solution d'adhésion 3DLAC Plus 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":250,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","options":["Title"],"media":[{"alt":null,"id":29007229059308,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\r\n\tLa solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du \r\n\t\u003ca href=\"https:\/\/langify-app.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\"\u003eruban bleu\u003c\/a\u003e pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de PLA, d'ABS, de polycarbonate, de PETG, de copolyester, et plus encore!\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContrairement au\u0026nbsp;\u003ca href=\"\/fr\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLAC classique\u003c\/a\u003e, le contenu n'est pas sous pression, et donc plus sûr pour le transport, notamment aérien.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eNe fonctionne pas pour le nylon, utiliser plutôt la colle de PVA en bâton (Elmer's par exemple).\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tVolume : \r\n\t\u003cstrong\u003e100mL\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tContient : Alcool Isopropyl - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcool denat - Parfum (alcoll Benzyl, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\r\n\u003c\/p\u003e"}

Solution d'adhésion 3DLAC Plus 100mL

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

Buse en laiton 0.40mm pour tête chauffante E3D v6

EN STOCK : 87

$9.99

{"id":8859304521,"title":"Buse en laiton 0.40mm pour tête chauffante E3D v6","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003eBuse en laiton 0.40mm pour tête chauffante E3D v6.\u003c\/p\u003e\u003ch5\u003eSpecs\u003c\/h5\u003e\u003cp\u003eMatériau : \u003cstrong\u003elaiton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre de l'ouverture : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre du filament : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiletage : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"E3D","type":"Open Parts","tags":["0.4mm","e3d","mk2","mk2s","mk3","mk3s","nozzle"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Buse en laiton 0.40mm pour tête chauffante E3D v6","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":87,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","options":["Title"],"media":[{"alt":null,"id":29057154416876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBuse en laiton 0.40mm pour tête chauffante E3D v6.\u003c\/p\u003e\u003ch5\u003eSpecs\u003c\/h5\u003e\u003cp\u003eMatériau : \u003cstrong\u003elaiton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre de l'ouverture : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiamètre du filament : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiletage : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

Buse en laiton 0.40mm pour tête chauffante E3D v6

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$9.99

Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6

Hotend thermistor for Prusa i3 MK2 and MK3

EN STOCK : 59

$14.99

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"E3D","type":"Open Parts","tags":["mk2","mk2s","mk3","mk3s","prusa","spare parts","thermistor"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":59,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","options":["Title"],"media":[{"alt":null,"id":28990215454956,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Hotend thermistor for Prusa i3 MK2 and MK3

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$14.99

Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+

Enduit haute performance Smooth-On XTC-3D®

EN STOCK : 27

De $17.00

{"id":397267696,"title":"Enduit haute performance Smooth-On XTC-3D®","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cp\u003e\r\n\t\u003cstrong style=\"background-color: initial;\"\u003e* 6.4 oz ou 24 oz\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e** Pour usage industriel seulement\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e*** impressions\u0026nbsp;SLA\/SLS, impressions\u0026nbsp;FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...)\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cdiv\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan\u003e*** -\u0026gt; Hacking t-glase pour un fini semblable au verre! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e\u0026nbsp;est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux liquides sont mélangés et peints sur toute impression 3D. L'enduit s'auto nivelle et mouille la surface uniformément sans laisser de trace de\u0026nbsp;pinceaux. Il prend 10 minutes à fonctionner et 4 heures à durcir (dépendamment de la masse et la température).\u0026nbsp;XTC-3D® \u0026nbsp;durcit en un revêtement dur et\u0026nbsp;résistant aux impacts, qui peut être sablé, apprêté et peint. Ajouter des couleurs et des effets métalliques devient très facile.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003ePeu coûteux à utiliser:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz couvre 100+ pouces carrés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003e90% en temps et travail épargné:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® rempli les stries de l'impression 3D et créé un fini lisse et lustré. Les besoins en post-finition sont presque éliminés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003eEnduisez n'importe quelle surface imprimée en 3D:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® peut être appliqué autant sur les impressions SLA que SLS.\u0026nbsp;Il fonctionne avec le\u0026nbsp;PLA, ABS, Laywoo, pièces \"Powder Printed\" et autres médiums rigides. Il peut aussi être utilisé pour enduire de l'EPS, du\u0026nbsp;EPDM et de la mousse d'uréthane, en plus du bois, du\u0026nbsp;plâtre, du\u0026nbsp;tissu, du\u0026nbsp;carton et du\u0026nbsp;papier.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cspan\u003eXTC-3D® ne contient aucun\u0026nbsp;VOC, phthalates ou phosphates.\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["tools"],"price":1700,"price_min":1700,"price_max":4800,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enduit haute performance Smooth-On XTC-3D® - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enduit haute performance Smooth-On XTC-3D® - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","options":["Size"],"media":[{"alt":null,"id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","width":1400},{"alt":null,"id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","width":1400},{"alt":null,"id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\r\n\t\u003cstrong style=\"background-color: initial;\"\u003e* 6.4 oz ou 24 oz\u003c\/strong\u003e\r\n\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e** Pour usage industriel seulement\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003e*** impressions\u0026nbsp;SLA\/SLS, impressions\u0026nbsp;FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...)\u003c\/strong\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cdiv\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan\u003e*** -\u0026gt; Hacking t-glase pour un fini semblable au verre! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/div\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e\u0026nbsp;est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux liquides sont mélangés et peints sur toute impression 3D. L'enduit s'auto nivelle et mouille la surface uniformément sans laisser de trace de\u0026nbsp;pinceaux. Il prend 10 minutes à fonctionner et 4 heures à durcir (dépendamment de la masse et la température).\u0026nbsp;XTC-3D® \u0026nbsp;durcit en un revêtement dur et\u0026nbsp;résistant aux impacts, qui peut être sablé, apprêté et peint. Ajouter des couleurs et des effets métalliques devient très facile.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003ePeu coûteux à utiliser:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz couvre 100+ pouces carrés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003e90% en temps et travail épargné:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® rempli les stries de l'impression 3D et créé un fini lisse et lustré. Les besoins en post-finition sont presque éliminés.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cstrong\u003e\u003cem\u003eEnduisez n'importe quelle surface imprimée en 3D:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® peut être appliqué autant sur les impressions SLA que SLS.\u0026nbsp;Il fonctionne avec le\u0026nbsp;PLA, ABS, Laywoo, pièces \"Powder Printed\" et autres médiums rigides. Il peut aussi être utilisé pour enduire de l'EPS, du\u0026nbsp;EPDM et de la mousse d'uréthane, en plus du bois, du\u0026nbsp;plâtre, du\u0026nbsp;tissu, du\u0026nbsp;carton et du\u0026nbsp;papier.\u003c\/span\u003e\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cspan\u003eXTC-3D® ne contient aucun\u0026nbsp;VOC, phthalates ou phosphates.\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e"}

Enduit haute performance Smooth-On XTC-3D®

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$17.00

* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...

Size

6.4 Oz

24 Oz

Polymaker PolyLite Silk PLA 1.75mm 1kg

EN STOCK : 86

$31.99

{"id":7446331621612,"title":"Polymaker PolyLite Silk PLA 1.75mm 1kg","handle":"polymaker-polylite-silk-pla-1-75mm-1kg","description":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e","published_at":"2021-11-13T19:16:19-05:00","created_at":"2021-11-13T19:16:19-05:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","pla","polymaker"],"price":3199,"price_min":3199,"price_max":3199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42051661660396,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"PMK-SLK-BLU-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405056748,"product_id":7446331621612,"position":2,"created_at":"2021-11-13T19:19:33-05:00","updated_at":"2021-11-13T19:19:33-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","variant_ids":[42051661660396]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Blue","public_title":"Blue","options":["Blue"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662414060,"title":"Bronze","option1":"Bronze","option2":null,"option3":null,"sku":"PMK-SLK-BNZ-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405548268,"product_id":7446331621612,"position":3,"created_at":"2021-11-13T19:20:19-05:00","updated_at":"2021-11-13T19:20:19-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","variant_ids":[42051662414060]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Bronze","public_title":"Bronze","options":["Bronze"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936708766","featured_media":{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662872812,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"PMK-SLK-GLD-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405417196,"product_id":7446331621612,"position":4,"created_at":"2021-11-13T19:20:14-05:00","updated_at":"2021-11-13T19:20:14-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","variant_ids":[42051662872812]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Gold","public_title":"Gold","options":["Gold"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663102188,"title":"Lime","option1":"Lime","option2":null,"option3":null,"sku":"PMK-SLK-LIM-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405515500,"product_id":7446331621612,"position":5,"created_at":"2021-11-13T19:20:18-05:00","updated_at":"2021-11-13T19:20:18-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","variant_ids":[42051663102188]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Lime","public_title":"Lime","options":["Lime"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663593708,"title":"Magenta","option1":"Magenta","option2":null,"option3":null,"sku":"PMK-SLK-MAG-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405482732,"product_id":7446331621612,"position":6,"created_at":"2021-11-13T19:20:16-05:00","updated_at":"2021-11-13T19:20:16-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","variant_ids":[42051663593708]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Magenta","public_title":"Magenta","options":["Magenta"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051664773356,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"PMK-SLK-SLV-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405613804,"product_id":7446331621612,"position":7,"created_at":"2021-11-13T19:20:21-05:00","updated_at":"2021-11-13T19:20:21-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","variant_ids":[42051664773356]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Silver","public_title":"Silver","options":["Silver"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","options":["Color"],"media":[{"alt":null,"id":26928673784044,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","width":1400},{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","width":1400},{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","width":1400},{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","width":1400},{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","width":1400},{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","width":1400},{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e"}

Polymaker PolyLite Silk PLA 1.75mm 1kg

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$31.99

PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.

Color

E3D Heater Cartridge 24V for Prusa i3 MK3/S

EN STOCK : 59

$11.99

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Voxel Factory","type":"Open Parts","tags":[],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":59,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","options":["Title"],"media":[{"alt":null,"id":28990234001644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e"}

E3D Heater Cartridge 24V for Prusa i3 MK3/S

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$11.99

Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+ / MINI

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

EN STOCK : 6

$69.99

{"id":3931939766390,"title":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","handle":"textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3","description":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2019-09-09T11:54:14-04:00","created_at":"2019-07-18T17:34:42-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk3","MK3S","prusa","spare parts"],"price":6999,"price_min":6999,"price_max":6999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29406152556662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-TXT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":6999,"weight":500,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","options":["Title"],"media":[{"alt":null,"id":29021440999660,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

St-Hubert Store : En calcul...
Burnaby Store : En calcul...

$69.99

Original spring steel sheet, double-sided with textured, powder-coated PEI surface. It is ONLY compatible with Prusa i3 MK2.5 / MK2.5S / MK3 / MK3S / MK3S+