{"id":6830499070132,"title":"Double-sided Powder-coated Satin Spring Steel Sheet","handle":"double-sided-powder-coated-satin-spring-steel-sheet","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFind more details about the spring steel sheets (including usage and maintenance instructions) in our \u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our \u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty (example of a \u003ca href=\"https:\/\/shop.prusa3d.com\/fotky\/satin_cosmetic_example.jpg\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.prusa3d.com\/fotky\/satin_cosmetic_example.jpg\"\u003ecosmetic scratch\u003c\/a\u003e that does not affect functionality). Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-09-08T14:17:33-04:00","created_at":"2021-08-26T17:20:11-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["bed","prusa","Satin","spare parts"],"price":6999,"price_min":6999,"price_max":6999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40448607158452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-SAT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Double-sided Powder-coated Satin Spring Steel Sheet","public_title":null,"options":["Default Title"],"price":6999,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet2_1400x_adb4ab1f-2085-45c6-a597-df3662c3ba69.jpg?v=1642179481","\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet_1400x_11b12ff7-8603-49dc-8231-1079aba92091.jpg?v=1642179481"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet2_1400x_adb4ab1f-2085-45c6-a597-df3662c3ba69.jpg?v=1642179481","options":["Title"],"media":[{"alt":null,"id":29021471441132,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet2_1400x_adb4ab1f-2085-45c6-a597-df3662c3ba69.jpg?v=1642179481"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet2_1400x_adb4ab1f-2085-45c6-a597-df3662c3ba69.jpg?v=1642179481","width":1400},{"alt":null,"id":29021470753004,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet_1400x_11b12ff7-8603-49dc-8231-1079aba92091.jpg?v=1642179481"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/double-sided-powder-coated-satin-spring-steel-sheet_1400x_11b12ff7-8603-49dc-8231-1079aba92091.jpg?v=1642179481","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFind more details about the spring steel sheets (including usage and maintenance instructions) in our \u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our \u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty (example of a \u003ca href=\"https:\/\/shop.prusa3d.com\/fotky\/satin_cosmetic_example.jpg\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/shop.prusa3d.com\/fotky\/satin_cosmetic_example.jpg\"\u003ecosmetic scratch\u003c\/a\u003e that does not affect functionality). Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/span\u003e\u003c\/p\u003e"}

Double-sided Powder-coated Satin Spring Steel Sheet

Product Description

Sku: PRU-SSS-SAT-PEI-000

Vendor: Prusa Research

$69.99

Maximum quantity available reached.

Tags : bed prusa Satin spare parts

Description

OVERVIEW:

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Find more details about the spring steel sheets (including usage and maintenance instructions) in our knowledge base.

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our knowledge base.

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty (example of a cosmetic scratch that does not affect functionality). Only defective sheets on arrival are covered by warranty.

It is ONLY compatible with Prusa i3 MK2.5 / MK2.5S / MK3 / MK3S / MK3S+

Related Products

Polymaker Polyterra PLA 1.75mm 1kg

IN STOCK: 480

From $25.99

Polymaker PolyLite PLA 1.75mm 1kg

IN STOCK: 178

$27.99

3DLAC for strong ABS (and more) adhesion to glass

IN STOCK: 0

$9.99

{"id":355423505,"title":"3DLAC for strong ABS (and more) adhesion to glass","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-04-12T14:53:10-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3DLAC for strong ABS (and more) adhesion to glass","public_title":null,"options":["Default Title"],"price":999,"weight":500,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","options":["Title"],"media":[{"alt":null,"id":29007220310252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1641919229","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC for strong ABS (and more) adhesion to glass

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$9.99

The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! *** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED ...

Original Prusa i3 MK3S+ DIY Kit

IN STOCK: 0

$999.00

{"id":6094472937652,"title":"Original Prusa i3 MK3S+ DIY Kit","handle":"original-prusa-i3-mk3s-plus-diy-kit","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA St-Hubert : OUT OF STOCK - NO ETA AVAILABLE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA Burnaby : OUT OF STOCK - NO ETA AVAILABLE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eSIGNATURE REQUIRED ON DELIVERY - YOU MIGHT HAVE TO GO PICK IT UP AT YOUR LOCAL POST OFFICE IF YOU ARE ABSENT ON DELIVERY DAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eOriginal Prusa i3 MK3S+ \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eIntroducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved, plastic parts and u-bolts were changed to metal clips which are easier to mount. A number of minor changes were done to the extruder plastic parts to improve overall reliability.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #00aaff;\"\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBlog post highlighting the new changes\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePrusa Silver PLA filament included!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eDIY kit – Assembly required, tools included, no soldering needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll printer kits now ship with the Smooth PEI spring steel sheet.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal Prusa design i3 MK3S+ kit\u003c\/strong\u003e, by Josef Prusa, the renowned RepRap 3D printer developer from the Czech Republic. \u003c\/p\u003e\n\u003cp\u003eThis DIY printer kit can use a wide array of open market filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to upgrade\u003c\/strong\u003e, making it the perfect printer for \"Makers\" who love to modify and customize their own machine.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll parts of this 3D printer are \u003c\/span\u003eOpen Source and are part of the RepRap project.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures :\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic XYZ Calibration\u003c\/li\u003e\n\u003cli\u003eAuto-mesh bed leveling\u003c\/li\u003e\n\u003cli\u003eFilament sensor\u003c\/li\u003e\n\u003cli\u003eRemovable, \u003cstrong\u003edouble-sided Smooth PEI\u003c\/strong\u003e print surface\u003c\/li\u003e\n\u003cli\u003eThe magnetic MK52 heatbed can be removed and parts come off easily\u003c\/li\u003e\n\u003cli\u003eAmbient temperature and PINDA probe thermistors for greater accuracy\u003c\/li\u003e\n\u003cli\u003eSilent Noctua cooling fan with RPM detection to prevent errors\u003c\/li\u003e\n\u003cli\u003eOctoprint ready\u003c\/li\u003e\n\u003cli\u003eNew Bondtech drive gear\u003c\/li\u003e\n\u003cli\u003eTrinamic2130 drivers detect lost steps, to correct layer shifting\u003c\/li\u003e\n\u003cli\u003eUp to 200mm\/s print speed!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMk3S+ Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNew SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNew printed extruder parts\u003c\/li\u003e\n\u003cli\u003eNew Bearing Clips for Y-axis bearings\u003c\/li\u003e\n\u003cli\u003eNew IR filament sensor + cable\u003c\/li\u003e\n\u003cli\u003eNew Hotend PTFE Tube\u003c\/li\u003e\n\u003cli\u003eFan shroud printed of ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eFull feature list with explanations here \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: \u003cspan\u003e42 x 42 x 39 cm (16.5 x 16.5 x 15.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 11 025 cm3 (675 in3)\u003c\/li\u003e\n\u003cli\u003eLayer height : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003ePrint surface : \u003cstrong\u003etextured, powder-coated PEI on double-sided steel sheet\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" style=\"line-height: 1.5;\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eFlexible materials\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026amp;_sid=9db733b92\u0026amp;_ss=r\"\u003eCarbon Fiber\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026amp;_sid=7b0a21242\u0026amp;_ss=r\"\u003e \u003cstrong\u003eGlass Fiber\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eAssembly instructions at prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eOfficial announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eMk3S+ Announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-11-26T20:29:13-05:00","created_at":"2020-11-26T12:45:41-05:00","vendor":"Prusa Research","type":"Prusa Research 3D Printers","tags":["3Dprinters","DIY","MK3S+","prusa","RepRap"],"price":99900,"price_min":99900,"price_max":99900,"available":false,"price_varies":false,"compare_at_price":104900,"compare_at_price_min":104900,"compare_at_price_max":104900,"compare_at_price_varies":false,"variants":[{"id":37604402102452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-3DP-I3M-K3S-PLS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original Prusa i3 MK3S+ DIY Kit","public_title":null,"options":["Default Title"],"price":99900,"weight":11800,"compare_at_price":104900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","options":["Title"],"media":[{"alt":null,"id":29017280610540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/original-prusa-i3-mk3s-kit-_1_1400x_c932fa0e-f017-460b-b49b-d814e5210a4f.jpg?v=1642112382","width":1400},{"alt":null,"id":29017280970988,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2_1400x_b18d3256-c0b7-45a9-9c75-c9ed65eb8f0b.jpg?v=1642112388","width":1400},{"alt":null,"id":29017281200364,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4_1400x_94672017-e9df-4b8a-8de5-0e83b2439d36.jpg?v=1642112394","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA St-Hubert : OUT OF STOCK - NO ETA AVAILABLE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA Burnaby : OUT OF STOCK - NO ETA AVAILABLE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eSIGNATURE REQUIRED ON DELIVERY - YOU MIGHT HAVE TO GO PICK IT UP AT YOUR LOCAL POST OFFICE IF YOU ARE ABSENT ON DELIVERY DAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eOriginal Prusa i3 MK3S+ \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eIntroducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved, plastic parts and u-bolts were changed to metal clips which are easier to mount. A number of minor changes were done to the extruder plastic parts to improve overall reliability.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #00aaff;\"\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBlog post highlighting the new changes\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePrusa Silver PLA filament included!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eDIY kit – Assembly required, tools included, no soldering needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll printer kits now ship with the Smooth PEI spring steel sheet.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal Prusa design i3 MK3S+ kit\u003c\/strong\u003e, by Josef Prusa, the renowned RepRap 3D printer developer from the Czech Republic. \u003c\/p\u003e\n\u003cp\u003eThis DIY printer kit can use a wide array of open market filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to upgrade\u003c\/strong\u003e, making it the perfect printer for \"Makers\" who love to modify and customize their own machine.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll parts of this 3D printer are \u003c\/span\u003eOpen Source and are part of the RepRap project.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures :\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic XYZ Calibration\u003c\/li\u003e\n\u003cli\u003eAuto-mesh bed leveling\u003c\/li\u003e\n\u003cli\u003eFilament sensor\u003c\/li\u003e\n\u003cli\u003eRemovable, \u003cstrong\u003edouble-sided Smooth PEI\u003c\/strong\u003e print surface\u003c\/li\u003e\n\u003cli\u003eThe magnetic MK52 heatbed can be removed and parts come off easily\u003c\/li\u003e\n\u003cli\u003eAmbient temperature and PINDA probe thermistors for greater accuracy\u003c\/li\u003e\n\u003cli\u003eSilent Noctua cooling fan with RPM detection to prevent errors\u003c\/li\u003e\n\u003cli\u003eOctoprint ready\u003c\/li\u003e\n\u003cli\u003eNew Bondtech drive gear\u003c\/li\u003e\n\u003cli\u003eTrinamic2130 drivers detect lost steps, to correct layer shifting\u003c\/li\u003e\n\u003cli\u003eUp to 200mm\/s print speed!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMk3S+ Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNew SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNew printed extruder parts\u003c\/li\u003e\n\u003cli\u003eNew Bearing Clips for Y-axis bearings\u003c\/li\u003e\n\u003cli\u003eNew IR filament sensor + cable\u003c\/li\u003e\n\u003cli\u003eNew Hotend PTFE Tube\u003c\/li\u003e\n\u003cli\u003eFan shroud printed of ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eFull feature list with explanations here \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: \u003cspan\u003e42 x 42 x 39 cm (16.5 x 16.5 x 15.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 11.8 kg (26.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 11 025 cm3 (675 in3)\u003c\/li\u003e\n\u003cli\u003eLayer height : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003ePrint surface : \u003cstrong\u003etextured, powder-coated PEI on double-sided steel sheet\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" style=\"line-height: 1.5;\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eFlexible materials\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026amp;_sid=9db733b92\u0026amp;_ss=r\"\u003eCarbon Fiber\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026amp;_sid=7b0a21242\u0026amp;_ss=r\"\u003e \u003cstrong\u003eGlass Fiber\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eAssembly instructions at prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eOfficial announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eMk3S+ Announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}

Original Prusa i3 MK3S+ DIY Kit

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$999.00

ETA St-Hubert : OUT OF STOCK - NO ETA AVAILABLE ETA Burnaby : OUT OF STOCK - NO ETA AVAILABLE SIGNATURE REQUIRED ON DELIVERY - YOU MIGHT HAVE TO GO PICK IT UP AT YOUR LOCAL POST OFFICE IF YOU ARE ABSENT ON DELIVERY DAY Original Prusa i3 MK3S+ Introducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved, plastic...

Polymaker PolyLite PETG 1.75mm 1kg

IN STOCK: 183

From $27.99

3DLAC Plus Adhesive Solution 100mL

IN STOCK: 113

$9.99

{"id":3874371698806,"title":"3DLAC Plus Adhesive Solution 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Plus Adhesive Solution 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":250,"compare_at_price":null,"inventory_quantity":113,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","options":["Title"],"media":[{"alt":null,"id":29007229059308,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1641919406","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC Plus Adhesive Solution 100mL

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$9.99

Brass Nozzle 0.40mm for E3D V6 Hot End

IN STOCK: 44

$9.99

{"id":8859304521,"title":"Brass Nozzle 0.40mm for E3D V6 Hot End","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"E3D","type":"Open Parts","tags":["0.4mm","e3d","mk2","mk2s","mk3","mk3s","nozzle"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brass Nozzle 0.40mm for E3D V6 Hot End","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","options":["Title"],"media":[{"alt":null,"id":29057154416876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1642694341","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

Brass Nozzle 0.40mm for E3D V6 Hot End

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$9.99

0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6

Hotend thermistor for Prusa i3 MK2 and MK3

IN STOCK: 42

$14.99

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"E3D","type":"Open Parts","tags":["mk2","mk2s","mk3","mk3s","prusa","spare parts","thermistor"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","options":["Title"],"media":[{"alt":null,"id":28990215454956,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1641572859","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Hotend thermistor for Prusa i3 MK2 and MK3

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$14.99

Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+

Smooth-On XTC-3D® High Performance Coating

IN STOCK: 18

From $17.00

{"id":397267696,"title":"Smooth-On XTC-3D® High Performance Coating","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["tools"],"price":1700,"price_min":1700,"price_max":4800,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","options":["Size"],"media":[{"alt":null,"id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1641940479","width":1400},{"alt":null,"id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1641940485","width":1400},{"alt":null,"id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1641940496","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

Smooth-On XTC-3D® High Performance Coating

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$17.00

* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) *** -> Hacking t-glase to look more like glass! <- *** XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...

Size

6.4 Oz

24 Oz

Polymaker PolyLite Silk PLA 1.75mm 1kg

IN STOCK: 93

$31.99

{"id":7446331621612,"title":"Polymaker PolyLite Silk PLA 1.75mm 1kg","handle":"polymaker-polylite-silk-pla-1-75mm-1kg","description":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e","published_at":"2021-11-13T19:16:19-05:00","created_at":"2021-11-13T19:16:19-05:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","pla","polymaker"],"price":3199,"price_min":3199,"price_max":3199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42051661660396,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"PMK-SLK-BLU-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405056748,"product_id":7446331621612,"position":2,"created_at":"2021-11-13T19:19:33-05:00","updated_at":"2021-11-13T19:19:33-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","variant_ids":[42051661660396]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Blue","public_title":"Blue","options":["Blue"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662414060,"title":"Bronze","option1":"Bronze","option2":null,"option3":null,"sku":"PMK-SLK-BNZ-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405548268,"product_id":7446331621612,"position":3,"created_at":"2021-11-13T19:20:19-05:00","updated_at":"2021-11-13T19:20:19-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","variant_ids":[42051662414060]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Bronze","public_title":"Bronze","options":["Bronze"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936708766","featured_media":{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662872812,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"PMK-SLK-GLD-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405417196,"product_id":7446331621612,"position":4,"created_at":"2021-11-13T19:20:14-05:00","updated_at":"2021-11-13T19:20:14-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","variant_ids":[42051662872812]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Gold","public_title":"Gold","options":["Gold"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663102188,"title":"Lime","option1":"Lime","option2":null,"option3":null,"sku":"PMK-SLK-LIM-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405515500,"product_id":7446331621612,"position":5,"created_at":"2021-11-13T19:20:18-05:00","updated_at":"2021-11-13T19:20:18-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","variant_ids":[42051663102188]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Lime","public_title":"Lime","options":["Lime"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663593708,"title":"Magenta","option1":"Magenta","option2":null,"option3":null,"sku":"PMK-SLK-MAG-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405482732,"product_id":7446331621612,"position":6,"created_at":"2021-11-13T19:20:16-05:00","updated_at":"2021-11-13T19:20:16-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","variant_ids":[42051663593708]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Magenta","public_title":"Magenta","options":["Magenta"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051664773356,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"PMK-SLK-SLV-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405613804,"product_id":7446331621612,"position":7,"created_at":"2021-11-13T19:20:21-05:00","updated_at":"2021-11-13T19:20:21-05:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","variant_ids":[42051664773356]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Silver","public_title":"Silver","options":["Silver"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","options":["Color"],"media":[{"alt":null,"id":26928673784044,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1636849149","width":1400},{"alt":null,"id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1636849173","width":1400},{"alt":null,"id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1636849219","width":1400},{"alt":null,"id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1636849214","width":1400},{"alt":null,"id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1636849218","width":1400},{"alt":null,"id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1636849216","width":1400},{"alt":null,"id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1636849221","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e"}

Polymaker PolyLite Silk PLA 1.75mm 1kg

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$31.99

PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.

Color

E3D Heater Cartridge 24V for Prusa i3 MK3/S

IN STOCK: 52

$11.99

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Voxel Factory","type":"Open Parts","tags":[],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":52,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","options":["Title"],"media":[{"alt":null,"id":28990234001644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1641573051","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+ \/ MINI\u003c\/p\u003e"}

E3D Heater Cartridge 24V for Prusa i3 MK3/S

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$11.99

Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+ / MINI

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

IN STOCK: 4

$69.99

{"id":3931939766390,"title":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","handle":"textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3","description":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2019-09-09T11:54:14-04:00","created_at":"2019-07-18T17:34:42-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk3","MK3S","prusa","spare parts"],"price":6999,"price_min":6999,"price_max":6999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29406152556662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-TXT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":6999,"weight":500,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","options":["Title"],"media":[{"alt":null,"id":29021440999660,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1_1400x_d1fe614e-582e-44ac-ae9a-80d1df3e3c98.jpg?v=1642179207","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eOriginal spring steel sheet, double-sided with textured, powder-coated PEI surface. \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3

St-Hubert Store : Calculating...
Burnaby Store : Calculating...

$69.99

Original spring steel sheet, double-sided with textured, powder-coated PEI surface. It is ONLY compatible with Prusa i3 MK2.5 / MK2.5S / MK3 / MK3S / MK3S+