Original Ultimaker Parts

{"id":3956271153270,"title":"Material Handling Station for Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":439500,"price_min":439500,"price_max":439500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Material Handling Station for Ultimaker S5","public_title":null,"options":["Default Title"],"price":439500,"weight":20000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Material_Station_front.png?v=1569360496","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Material_Station_Front_View.png?v=1569360483","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Material_Station_Studio_with_S5.png?v=1569360483"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Material_Station_front.png?v=1569360496","options":["Title"],"content":"\u003cp\u003eGet more out of your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e with the Material Station. Load up to six spools of filament in a humidity-controlled, fully enclosed compartment. The station integrates with Cura to enable live spool switching for uninterrupted, hassle-free printing.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy loading : front-facing loading for up to six spools of filament\u003c\/li\u003e\n\u003cli\u003eUninterrupted printing : automatic spool switching when a spool runs out\u003c\/li\u003e\n\u003cli\u003eHumidity control : intelligent atmospheric management and self-regenerating desiccant ensures optimal environmental conditions for your filament\u003c\/li\u003e\n\u003cli\u003eEasy setup and monitoring : NFC material recognition for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, fully integrates with Cura software.\u003c\/li\u003e\n\u003cli\u003eComposite materials compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with Ultimaker and 3rd party materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity : 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition : auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type : dual-geared, abrasion resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output : max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration : Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":3956284031094,"title":"Ultimaker Air Manager for Ultimaker S5","handle":"ultimaker-air-manager-for-ultimaker-s5","description":"\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:45:22-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","enclosure","s5","ultimaker"],"price":99500,"price_min":99500,"price_max":99500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505260650614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-AIR-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker S5","public_title":null,"options":["Default Title"],"price":99500,"weight":4000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Air_Manager_Studio_Front_View.png?v=1568917666","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Air_Manager_Back_View.png?v=1568917648","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Air_Manager_with_S5.png?v=1568923450"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_S5_Air_Manager_Studio_Front_View.png?v=1568917666","options":["Title"],"content":"\u003cp\u003eSitting atop your \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp\u003eThrough Cura and the Ultimaker S5, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPA filter\u003c\/li\u003e\n\u003cli\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in) \u003c\/li\u003e\n\u003cli\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/li\u003e\n\u003cli\u003eNet weight : 3.6kg\u003c\/li\u003e\n\u003cli\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli\u003eOperating sound : less than 51 dBA (including Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible printer : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli\u003eCompatible materials : Optimized for \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":104650047497,"title":"Ultimaker Print Core 0.25mm","handle":"ultimaker-print-core-0-25mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers. Use the 0.25mm print core to print finely detailed parts with PLA, ABS, Nylon, CPE, PP, and more!\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.25mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-12-05T11:52:23-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":14995,"price_min":14995,"price_max":14995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1366071509001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.25mm","public_title":null,"options":["Default Title"],"price":14995,"weight":800,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1539829395"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-25mm-1.jpeg?v=1539829395","options":["Title"],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers. Use the 0.25mm print core to print finely detailed parts with PLA, ABS, Nylon, CPE, PP, and more!\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.25mm\u003c\/strong\u003e"}

{"id":10091323593,"title":"Ultimaker Print Core 0.4mm","handle":"ultimaker-print-core-0-4mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.4mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-07-18T17:07:31-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":14995,"price_min":14995,"price_max":14995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40865547529,"title":"AA","option1":"AA","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.4mm - AA","public_title":"AA","options":["AA"],"price":14995,"weight":800,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374524"},{"id":40865547593,"title":"BB","option1":"BB","option2":null,"option3":null,"sku":"UMK-COR-BBB-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.4mm - BB","public_title":"BB","options":["BB"],"price":14995,"weight":800,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374531"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1539829254"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-4mm-1.jpeg?v=1539829254","options":["Core type"],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.4mm\u003c\/strong\u003e"}

{"id":10098740745,"title":"Ultimaker Print Core 0.8mm","handle":"ultimaker-print-core-0-8mm","description":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.8mm\u003c\/strong\u003e","published_at":"2017-07-18T17:07:23-04:00","created_at":"2017-07-19T15:06:24-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":14995,"price_min":14995,"price_max":14995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40932889609,"title":"AA","option1":"AA","option2":null,"option3":null,"sku":"UMK-COR-AAA-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.8mm - AA","public_title":"AA","options":["AA"],"price":14995,"weight":800,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":40932889737,"title":"BB","option1":"BB","option2":null,"option3":null,"sku":"UMK-COR-BBB-285-080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core 0.8mm - BB","public_title":"BB","options":["BB"],"price":14995,"weight":800,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1539829258"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-print-core-0-8mm-1.jpeg?v=1539829258","options":["Core type"],"content":"\u003cp\u003eA replacement print core for Ultimaker 3 \/ Ultimaker 3 Extended 3D printers.\u003c\/p\u003e\n\u003cp\u003eMake sure to select the right core type! The AA print core is optimized for \u003ca href=\"collections\/ultimaker-filaments\" title=\"Ultimaker Filaments\"\u003ebuilding materials\u003c\/a\u003e (PLA, ABS, CPE, etc.) while the BB print core is intended for use with the \u003ca href=\"\/products\/ultimaker-pva-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PVA Filament 2.85mm\" rel=\"noopener noreferrer\"\u003eUltimaker PVA\u003c\/a\u003e support material.\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.8mm\u003c\/strong\u003e"}

{"id":2315062476918,"title":"Ultimaker Print Core CC 0.6mm","handle":"ultimaker-print-core-cc-0-6mm","description":"\u003cp\u003e\u003cspan\u003eTo enable hassle-free printing of composite materials, the print core CC red features a 0.6 mm diameter nozzle with a specially customized geometry and a wear-resistant ruby cone to ensure reliable 3D printing with composite materials.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease note: Abrasive material printing compatible with the Ultimaker S5 only.\u003c\/span\u003e\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.6mm\u003c\/strong\u003e","published_at":"2018-11-13T12:48:18-05:00","created_at":"2018-11-06T17:23:56-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["2.85mm","engineering","print core","s5","Ultimaker"],"price":38500,"price_min":38500,"price_max":38500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20883162595446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-COR-CCC-285-060","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core CC 0.6mm","public_title":null,"options":["Default Title"],"price":38500,"weight":800,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_Print_Core_0.6mm_CC.JPG?v=1541543855"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker_Print_Core_0.6mm_CC.JPG?v=1541543855","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eTo enable hassle-free printing of composite materials, the print core CC red features a 0.6 mm diameter nozzle with a specially customized geometry and a wear-resistant ruby cone to ensure reliable 3D printing with composite materials.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease note: Abrasive material printing compatible with the Ultimaker S5 only.\u003c\/span\u003e\u003c\/p\u003e\nManufacturer : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003cbr\u003eNozzle size : \u003cstrong\u003e0.6mm\u003c\/strong\u003e"}

{"id":10098732937,"title":"Ultimaker 3 Cleaning Filament","handle":"ultimaker-3-cleaning-filament","description":"\u003cp\u003eKeep your Ultimaker 3 print cores in optimal condition using this cleaning filament. Use it as part of your regular maintenance and to unclog a jammed core. Especially effective for cleaning BB cores.\u003c\/p\u003e\n\u003cp\u003e10 per pack, 20 cm long each.\u003c\/p\u003e\n\u003cp\u003eFull instructions on how to use the cleaning filament can be found at the \u003ca href=\"https:\/\/ultimaker.com\/en\/resources\/49780-ultimaker-3-cleaning-filament\" target=\"_blank\" title=\"Ultimaker 3 Cleaning Filament instructions\" rel=\"noopener noreferrer\"\u003eUltimaker website\u003c\/a\u003e!\u003c\/p\u003e","published_at":"2017-07-19T14:38:12-04:00","created_at":"2017-07-19T15:05:10-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":2495,"price_min":2495,"price_max":2495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40932816969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-FIL-CLE-NIN-UM3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker 3 Cleaning Filament","public_title":null,"options":["Default Title"],"price":2495,"weight":300,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1539829256"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-3-cleaning-filament-1.jpg?v=1539829256","options":["Title"],"content":"\u003cp\u003eKeep your Ultimaker 3 print cores in optimal condition using this cleaning filament. Use it as part of your regular maintenance and to unclog a jammed core. Especially effective for cleaning BB cores.\u003c\/p\u003e\n\u003cp\u003e10 per pack, 20 cm long each.\u003c\/p\u003e\n\u003cp\u003eFull instructions on how to use the cleaning filament can be found at the \u003ca href=\"https:\/\/ultimaker.com\/en\/resources\/49780-ultimaker-3-cleaning-filament\" target=\"_blank\" title=\"Ultimaker 3 Cleaning Filament instructions\" rel=\"noopener noreferrer\"\u003eUltimaker website\u003c\/a\u003e!\u003c\/p\u003e"}

{"id":10334152073,"title":"Ultimaker Advanced 3D Printing Kit","handle":"advanced-3d-printing-kit-for-the-ultimaker-3","description":"\u003cp\u003eFor a smoother experience when printing with engineering materials (\u003ca href=\"\/products\/ultimaker-black-abs-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker ABS Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eABS\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-black-cpe-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker CPE Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE\u003c\/a\u003e \/ \u003ca href=\"\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" target=\"_blank\" title=\"Ultimaker CPE+ Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE+\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-pc-filament-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PC Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePC\u003c\/a\u003e) with your Ultimaker 3D printer, try the advanced 3D printing kit. Includes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Front enclosure\u003c\/li\u003e\n\u003cli\u003e25 Adhesion sheets\u003c\/li\u003e\n\u003cli\u003e1 Adhesive applicator\u003c\/li\u003e\n\u003cli\u003e1 Glass plate\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-08-24T13:38:12-04:00","created_at":"2017-08-24T14:35:21-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["ABS","CPE","PC","Tools","Ultimaker"],"price":11900,"price_min":11900,"price_max":15995,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43958285833,"title":"Ultimaker 3","option1":"Ultimaker 3","option2":null,"option3":null,"sku":"UMK-APK-UM3-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 3","public_title":"Ultimaker 3","options":["Ultimaker 3"],"price":15995,"weight":2000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836378201"},{"id":45027401737,"title":"Ultimaker 3 Extended","option1":"Ultimaker 3 Extended","option2":null,"option3":null,"sku":"UMK-APK-UM3-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 3 Extended","public_title":"Ultimaker 3 Extended","options":["Ultimaker 3 Extended"],"price":15995,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":45027401801,"title":"Ultimaker 2+","option1":"Ultimaker 2+","option2":null,"option3":null,"sku":"UMK-APK-UM2-REG-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 2+","public_title":"Ultimaker 2+","options":["Ultimaker 2+"],"price":11900,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":45027401865,"title":"Ultimaker 2+ Extended","option1":"Ultimaker 2+ Extended","option2":null,"option3":null,"sku":"UMK-APK-UM2-EXT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Advanced 3D Printing Kit - Ultimaker 2+ Extended","public_title":"Ultimaker 2+ Extended","options":["Ultimaker 2+ Extended"],"price":11900,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1539829303"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-advanced-3d-printing-kit-1.jpeg?v=1539829303","options":["3D Printer"],"content":"\u003cp\u003eFor a smoother experience when printing with engineering materials (\u003ca href=\"\/products\/ultimaker-black-abs-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker ABS Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eABS\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-black-cpe-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker CPE Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE\u003c\/a\u003e \/ \u003ca href=\"\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" target=\"_blank\" title=\"Ultimaker CPE+ Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003eCPE+\u003c\/a\u003e, \u003ca href=\"\/products\/ultimaker-pc-filament-2-85mm-750g\" target=\"_blank\" title=\"Ultimaker PC Filament at Voxel Factory\" rel=\"noopener noreferrer\"\u003ePC\u003c\/a\u003e) with your Ultimaker 3D printer, try the advanced 3D printing kit. Includes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Front enclosure\u003c\/li\u003e\n\u003cli\u003e25 Adhesion sheets\u003c\/li\u003e\n\u003cli\u003e1 Adhesive applicator\u003c\/li\u003e\n\u003cli\u003e1 Glass plate\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":10403345865,"title":"Ultimaker Bed Adhesion Sheets","handle":"ultimaker-bed-adhesion-sheets","description":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-09-08T15:30:03-04:00","created_at":"2017-09-08T15:40:16-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":3495,"price_min":3495,"price_max":3495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45026908553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-BED-ADH-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Bed Adhesion Sheets","public_title":null,"options":["Default Title"],"price":3495,"weight":1000,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1539829369"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1.jpeg?v=1539829369","options":["Title"],"content":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":10413220489,"title":"Ultimaker Replacement Glass Build Plate","handle":"ultimaker-replacement-glass-build-plate","description":"Replacement Glass Build Plate for Ultimaker 2 \u0026amp; 3","published_at":"2017-12-05T12:14:05-05:00","created_at":"2017-09-12T09:34:40-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":4695,"price_min":4695,"price_max":4695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45210972617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-GBP-UM3-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Replacement Glass Build Plate","public_title":null,"options":["Default Title"],"price":4695,"weight":1000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-replacement-glass-build-plate-1.jpeg?v=1539829373"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-replacement-glass-build-plate-1.jpeg?v=1539829373","options":["Title"],"content":"Replacement Glass Build Plate for Ultimaker 2 \u0026amp; 3"}

{"id":10339348809,"title":"Olsson Block Kit for Ultimaker 2 \u0026 2+","handle":"olsson-block-kit","description":"\u003cp\u003eHeater block upgrade designed by Anders Olsson for the Ultimaker 2 \/ 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExchangeable brass nozzles sizes 0.25, 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003cli\u003e1 mini screwdriver\u003c\/li\u003e\n\u003cli\u003e1 hex adapter\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-08-25T13:55:17-04:00","created_at":"2017-08-25T14:09:59-04:00","vendor":"3DVerkstan AB","type":"Open Parts","tags":["Ultimaker"],"price":13995,"price_min":13995,"price_max":13995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44041323529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VRK-OLS-BLK-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Olsson Block Kit for Ultimaker 2 \u0026 2+","public_title":null,"options":["Default Title"],"price":13995,"weight":100,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1539829305"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-olsson-block-kit-for-ultimaker-2-2-1.jpeg?v=1539829305","options":["Title"],"content":"\u003cp\u003eHeater block upgrade designed by Anders Olsson for the Ultimaker 2 \/ 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExchangeable brass nozzles sizes 0.25, 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003cli\u003e1 mini screwdriver\u003c\/li\u003e\n\u003cli\u003e1 hex adapter\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":10403314761,"title":"Ultimaker 2 to Ultimaker 2+ Upgrade Kit","handle":"ultimaker-2-to-ultimaker-2-upgrade-kit","description":"\u003cp\u003eInstall this upgrade kit to turn your Ultimaker 2 in an up-to-date Ultimaker 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled print head\u003c\/li\u003e\n\u003cli\u003eSwappable nozzles\u003c\/li\u003e\n\u003cli\u003eGeared feeder motor\u003c\/li\u003e\n\u003cli\u003eGeared feeder\u003c\/li\u003e\n\u003cli\u003ePrint head shafts\u003c\/li\u003e\n\u003cli\u003eUltimaker calibration card\u003c\/li\u003e\n\u003cli\u003eFilament reel holder\u003c\/li\u003e\n\u003cli\u003eAxis tools\u003c\/li\u003e\n\u003cli\u003eBuild plate clamps\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-09-27T09:01:04-04:00","created_at":"2017-09-08T15:22:26-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Olsson","Ultimaker"],"price":49900,"price_min":49900,"price_max":49900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45026285513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-UPG-UM2-U2P-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker 2 to Ultimaker 2+ Upgrade Kit","public_title":null,"options":["Default Title"],"price":49900,"weight":4000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-2-to-ultimaker-2-upgrade-kit-1.png?v=1539829367"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-2-to-ultimaker-2-upgrade-kit-1.png?v=1539829367","options":["Title"],"content":"\u003cp\u003eInstall this upgrade kit to turn your Ultimaker 2 in an up-to-date Ultimaker 2+.\u003c\/p\u003e\n\u003cp\u003eIncludes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled print head\u003c\/li\u003e\n\u003cli\u003eSwappable nozzles\u003c\/li\u003e\n\u003cli\u003eGeared feeder motor\u003c\/li\u003e\n\u003cli\u003eGeared feeder\u003c\/li\u003e\n\u003cli\u003ePrint head shafts\u003c\/li\u003e\n\u003cli\u003eUltimaker calibration card\u003c\/li\u003e\n\u003cli\u003eFilament reel holder\u003c\/li\u003e\n\u003cli\u003eAxis tools\u003c\/li\u003e\n\u003cli\u003eBuild plate clamps\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":10596253705,"title":"Ultimaker Replacement Bowden Tube","handle":"ultimaker-bowden-tube","description":"\u003cp\u003eUltimaker Bowden Tube for Ultimaker Original, Ultimaker 2+ (and Extended), Ultimaker 3 (and Extended).\u003c\/p\u003e\n\u003cp\u003eUltimaker Part Number : 1266\u003c\/p\u003e","published_at":"2017-10-11T14:47:24-04:00","created_at":"2017-09-27T10:51:41-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["spare parts","ultimaker","um","um2","um3"],"price":2695,"price_min":2695,"price_max":2695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47577301001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-SPP-BWD-003-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Replacement Bowden Tube","public_title":null,"options":["Default Title"],"price":2695,"weight":300,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-replacement-bowden-tube-1.jpeg?v=1539829385"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-replacement-bowden-tube-1.jpeg?v=1539829385","options":["Title"],"content":"\u003cp\u003eUltimaker Bowden Tube for Ultimaker Original, Ultimaker 2+ (and Extended), Ultimaker 3 (and Extended).\u003c\/p\u003e\n\u003cp\u003eUltimaker Part Number : 1266\u003c\/p\u003e"}

{"id":2175941738614,"title":"Ultimaker S5 Replacement Glass Build Plate","handle":"ultimaker-s5-replacement-glass-build-plate","description":"\u003cp\u003eReplacement Glass Build Plate for Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eUltimaker part 1429\u003c\/p\u003e","published_at":"2017-12-05T12:14:05-05:00","created_at":"2018-09-27T16:33:57-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":4095,"price_min":4095,"price_max":4095,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19715094741110,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-GBP-US5-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Replacement Glass Build Plate","public_title":null,"options":["Default Title"],"price":4095,"weight":1200,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-replacement-glass-build-plate-1.jpeg?v=1539829488"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-s5-replacement-glass-build-plate-1.jpeg?v=1539829488","options":["Title"],"content":"\u003cp\u003eReplacement Glass Build Plate for Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eUltimaker part 1429\u003c\/p\u003e"}

{"id":2349218857078,"title":"Ultimaker S5 Bed Adhesion Sheets","handle":"ultimaker-s5-bed-adhesion-sheets","description":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker S5 glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003eAvailability : January 2019.\u003c\/p\u003e","published_at":"2017-09-08T15:30:03-04:00","created_at":"2018-11-20T15:15:17-05:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["Ultimaker"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21162265935990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-BED-ADH-0S5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Bed Adhesion Sheets","public_title":null,"options":["Default Title"],"price":4500,"weight":1000,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1_247a9743-fc11-421e-b46a-cc35f5994be2.jpeg?v=1542744919"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-parts-ultimaker-bed-adhesion-sheets-1_247a9743-fc11-421e-b46a-cc35f5994be2.jpeg?v=1542744919","options":["Title"],"content":"\u003cp\u003ePack of 25 self adhesive sheets to use on your Ultimaker S5 glass build plate for optimal material adhesion. Recommended for engineering materials.\u003c\/p\u003e\n\u003cp\u003eAvailability : January 2019.\u003c\/p\u003e"}

{"id":2623487574134,"title":"Replacement Fan Magnet for Ultimaker 3D Printers","handle":"replacement-fan-magnet-for-ultimaker-3d-printers","description":"\u003cp\u003eReplacement Fan Magnet for Ultimaker 3D Printers\u003c\/p\u003e\n\u003cp\u003eUltimaker product # 2139\u003c\/p\u003e","published_at":"2019-04-02T13:54:51-04:00","created_at":"2019-04-02T13:56:32-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["spare parts","ultimaker 3","ultimaker 3 extended","ultimaker s5"],"price":100,"price_min":100,"price_max":100,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22488394203254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-SPP-MGT-FAN-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Replacement Fan Magnet for Ultimaker 3D Printers","public_title":null,"options":["Default Title"],"price":100,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":[],"featured_image":null,"options":["Title"],"content":"\u003cp\u003eReplacement Fan Magnet for Ultimaker 3D Printers\u003c\/p\u003e\n\u003cp\u003eUltimaker product # 2139\u003c\/p\u003e"}

{"id":2678029746294,"title":"Ultimaker S5 Replacement Bowden Tube","handle":"ultimaker-s5-replacement-bowden-tube","description":"\u003cp\u003eUltimaker Bowden Tube for Ultimaker S5.\u003c\/p\u003e\n\u003cp\u003eUltimaker Part Number : 1373\u003c\/p\u003e","published_at":"2019-05-22T15:21:05-04:00","created_at":"2019-05-22T15:21:05-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["s5","spare parts","ultimaker","um"],"price":3695,"price_min":3695,"price_max":3695,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22662572376182,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-SPP-BWD-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Replacement Bowden Tube","public_title":null,"options":["Default Title"],"price":3695,"weight":300,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":[],"featured_image":null,"options":["Title"],"content":"\u003cp\u003eUltimaker Bowden Tube for Ultimaker S5.\u003c\/p\u003e\n\u003cp\u003eUltimaker Part Number : 1373\u003c\/p\u003e"}