- Home
- Original Prusa i3 MK3/S Parts
Original Prusa i3 MK3/S Parts
Prusa MMU2S Upgrade Kit for MK3 Printer
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Prusa MMU2S Upgrade Kit for MK3 Printer
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$449.99
This upgrade kit allows multi-filament printing on your Prusa i3 MK3 or MK3S printer. This upgrade will let you print with up to 5 different filaments at once. Thanks to its direct-drive mechanism, the filament loading is now more jam-resistant and reliable. This is a DIY kit, so some assembly is required! Check out the assembly instructions for...
Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Replacement hotend thermistor for the Prusa i3 MK2/S and MK3/S. Fully wired and ready to be installed.
Bed Thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Bed Thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
Replacement thermistor for the Prusa i3 MK2/S and MK3/S. Fully wired and ready to be installed.
E3D Heater Cartridge 24V for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Heater Cartridge 24V for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$11.99
Replacement heater cartridge for the Prusa i3 MK3 or MK3S. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V
Original E3D v6.1 24V Hotend for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original E3D v6.1 24V Hotend for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$99.99
The original E3D v6.1 hotend, standard issue on the Prusa i3 MK3/S 3D printer. Comes fully assembled with the thermistor, heater cartridge and 0.40mm nozzle. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing hotend. If you nee...
Original E3D v6.1 24V Hotend KIT for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original E3D v6.1 24V Hotend KIT for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$94.99
The original E3D v6.1 hotend, standard issue on the Prusa i3 MK3/S 3D printer. Comes as a kit that needs to be assembled. Included are the thermistor, heater cartridge and 0.40mm nozzle. Instructions available from E3D-Online. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the ...
E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.40mm Filament diameter : 1.75mm
E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.50mm Filament diameter : 1.75mm
Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
0.25mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.25mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.60mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.60mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.80mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.80mm Filament diameter : 1.75mm Thread : M6
Spring Steel Sheet with Smooth Double-sided PEI for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Spring Steel Sheet with Smooth Double-sided PEI for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$59.99
Spring steel sheet with smooth, double-sided PEI coating. Printing surface for the Prusa i3 MK3 / MK3S 3D printers, to be used in conjunction with the MK52 magnetic heatbed. Textured, powder-coated spring steel sheet also available.
Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$69.99
Original spring steel sheet, double-sided with textured, powder-coated PEI surface. To be used with the Prusa i3 MK3 / MK3S 3D printer.
Replacement PEI Sheet for Prusa i3 MK2 or MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Replacement PEI Sheet for Prusa i3 MK2 or MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.95
Replacement PEI sheet for the MK42 or MK52 heatbed (Prusa i3 MK2 / MK2S / MK3). For instructions on how to replace a damaged PEI sheet on your heatbed, please follow the guide found on the Prusa Research website. Specs 260 x 242 mm 175um thickness 3M 200MP adhesive
PINDA Probe v2.0 for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

PINDA Probe v2.0 for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$24.99
Replacement PINDA probe v2.0 for the Prusa i3 MK3/S 3D printer. Not compatible with the MK2/S, use the original PINDA probe instead.
Prusa i3 MK3 Noctua Hotend Cooling Fan 5V
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Prusa i3 MK3 Noctua Hotend Cooling Fan 5V
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$20.99
Noctua NF-A4x10 hotend cooling fan for Prusa i3 MK3 and MK3S. Power : 5V 0.25W 0.05A
Replacement Print Fan 5V for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Replacement Print Fan 5V for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$10.99
Print fan for the Original Prusa i3 MK3/MK3S 3D printer, with RPM measuring. This fan is not compatible with MK2/S, use the 12V fan instead. Dimensions : 51.5 x 51.5 x 15mm Power : 5V 0.3A Max RPM : 4500
Replacement Einsy RAMBo Board for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Replacement Einsy RAMBo Board for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$199.99
Einsy RAMBo (named after Einstein) is the revolutionary 3D printer board and it is a core of the MK3S performance. Not for the Prusa i3 MK3S Major Features: 4 x integrated Trinamic TMC2130 1/256th microstep motor drivers 4 PWM Mosfet outputs 3 thermistor inputs + ZProbe thermistor, SPI (Serial Peripheral Interface) communicated motor current co...
24V 240W Power Supply Kit for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

24V 240W Power Supply Kit for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$149.99
The power supply unit (PSU) for the Original Prusa i3 MK3 and MK3S. This is the most recent version of the PSU (black), and includes the cover and cables to upgrade from the previous, silver PSU. Not compatible with Prusa i3 MK2/S, use the 12V power supply instead. Power : 24V 240W
E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$20.99
Replacement heater block kit for the E3D v6 hotend of the Prusa i3 MK2 / MK3 / MMU / MMU2. Includes the screws and matching hex keys to hold the heater cartridge and the thermistor. The heater block is also available "naked", without any fittings, here.
E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$24.99
Replacement heatbreak for the E3D v6 hotend of the Prusa i3 MK3/S and MMU2S. This heatbreak is not the standard E3D v6 heatbreak, it was developped by Prusa and E3D specially for the MK3 and MMU.