Ultimaker Transparent CPE+ 2.85mm 700g

{"id":9740609481,"title":"Ultimaker White CPE+ 2.85mm 700g","handle":"ultimaker-white-cpe-plus-2-85mm-700g","description":"\u003cp\u003eThe recommended co-polyester filament to use with your Ultimaker 3D printer. Thanks to its chemical resistance and dimensional stability, CPE is a favorite for the creation of functional prototypes and mechanical parts. The Ultimaker CPE is tough, adheres well to itself during printing, and emits low levels of ultra-fine particles and volatile organic compounds (VOCs). CPE+ features similar properties compared to CPE, with the added advantage of higher temperature resistance and impact strength.\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eWhite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800535847708\/Ultimaker-CPE-PLUS-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010204279\/SDS_CPE__v3.004-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e","published_at":"2017-06-12T16:14:16-04:00","created_at":"2017-06-12T15:51:13-04:00","vendor":"Ultimaker","type":"Ultimaker Filaments","tags":["2.85mm","CPE","Ultimaker","white"],"price":10900,"price_min":10900,"price_max":10900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37728704969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-CPP-285-WHT-750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker White CPE+ 2.85mm 700g","public_title":null,"options":["Default Title"],"price":10900,"weight":1300,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8718836374920","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-white-cpe-2-85mm-700g-1_1400x_6b67113f-1ec1-48df-8026-cd7426dad85f.jpg?v=1642544983"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-white-cpe-2-85mm-700g-1_1400x_6b67113f-1ec1-48df-8026-cd7426dad85f.jpg?v=1642544983","options":["Title"],"media":[{"alt":null,"id":29047656120556,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-white-cpe-2-85mm-700g-1_1400x_6b67113f-1ec1-48df-8026-cd7426dad85f.jpg?v=1642544983"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-white-cpe-2-85mm-700g-1_1400x_6b67113f-1ec1-48df-8026-cd7426dad85f.jpg?v=1642544983","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe recommended co-polyester filament to use with your Ultimaker 3D printer. Thanks to its chemical resistance and dimensional stability, CPE is a favorite for the creation of functional prototypes and mechanical parts. The Ultimaker CPE is tough, adheres well to itself during printing, and emits low levels of ultra-fine particles and volatile organic compounds (VOCs). CPE+ features similar properties compared to CPE, with the added advantage of higher temperature resistance and impact strength.\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eWhite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800535847708\/Ultimaker-CPE-PLUS-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010204279\/SDS_CPE__v3.004-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e"}

{"id":104581726217,"title":"Ultimaker Breakaway Support 2.85mm 750g","handle":"ultimaker-breakaway-support-material-2-85mm-750g","description":"\u003cp\u003eUltimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on your 3D print. Designed for a hassle-free 3D printing experience, Breakaway provides good adhesion to \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-abs-2-85mm-750g\" title=\"Ultimaker Black ABS Filament at Voxel Factory\" target=\"_blank\"\u003eABS\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-pla-2-85mm-750g\" title=\"UItimaker Black PLA Filament at Voxel Factory\" target=\"_blank\"\u003ePLA\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-nylon-2-85mm-750g\" title=\"Ultimaker Black Nylon Filament at Voxel Factory\" target=\"_blank\"\u003eNylon\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-cpe-2-85mm-750g\" title=\"Ultimaker Black CPE Filament at Voxel Factory\" target=\"_blank\"\u003eCPE\u003c\/a\u003e, or \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" title=\"Ultimaker Black CPE+ Filament at Voxel Factory\" target=\"_blank\"\u003eCPE+\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"480\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NmLf3kGsAbU\" frameborder=\"0\" gesture=\"media\" allow=\"encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBreakaway support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct vendor : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter tolerance : \u003cstrong\u003e±0.10mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuantity :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e750g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800469972124\/Ultimaker-Breakaway-TDS-v2.00.pdf\" title=\"Ultimaker Breakaway Technical Data Sheet\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010201059\/SDS_Breakaway-EN.pdf\" title=\"Ultimaker Breakaway Safety Data Sheet\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003e3D Printing tips\u003c\/h5\u003e\n\u003cp\u003ePrint temp: \u003cstrong\u003eUse Cura profile\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNozzle: \u003cstrong\u003eAny size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrint speed: \u003cstrong\u003e30mm\/s to 300mm\/s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRetraction: \u003cstrong\u003eCheck your printer documentation!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHot print bed: \u003cstrong\u003e60°C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCold print bed: \u003cstrong\u003eYes\u003c\/strong\u003e (Use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" target=\"_blank\"\u003e3M #2090 blue painter's tape\u003c\/a\u003e for better adhesion)\u003c\/p\u003e\n\u003cp\u003ePost processing: \u003cstrong\u003e-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003eNot sure how to choose which support material to use for your print? Read the \u003ca href=\"https:\/\/ultimaker.com\/en\/blog\/52274-which-3d-printing-supports-to-use-pla-pva-or-breakaway\" title=\"Ultimaker Support Material Blog Post at Ultimaker.com\" target=\"_blank\"\u003eblog post\u003c\/a\u003e by Ultimaker regarding Breakaway, PVA, and building material support.\u003c\/p\u003e","published_at":"2017-12-05T09:37:53-05:00","created_at":"2017-12-05T10:22:31-05:00","vendor":"Ultimaker","type":"Ultimaker Filaments","tags":[],"price":12600,"price_min":12600,"price_max":12600,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1361028710409,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-BSM-285-PRL-750","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker Breakaway Support 2.85mm 750g","public_title":null,"options":["Default Title"],"price":12600,"weight":1300,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836378522","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-breakaway-support-2-85mm-750g-1_1400x_3ce9cbe7-a3c5-40c0-828d-8e466d481b0c.jpg?v=1642544889"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-breakaway-support-2-85mm-750g-1_1400x_3ce9cbe7-a3c5-40c0-828d-8e466d481b0c.jpg?v=1642544889","options":["Title"],"media":[{"alt":null,"id":29047651172588,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-breakaway-support-2-85mm-750g-1_1400x_3ce9cbe7-a3c5-40c0-828d-8e466d481b0c.jpg?v=1642544889"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-breakaway-support-2-85mm-750g-1_1400x_3ce9cbe7-a3c5-40c0-828d-8e466d481b0c.jpg?v=1642544889","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eUltimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on your 3D print. Designed for a hassle-free 3D printing experience, Breakaway provides good adhesion to \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-abs-2-85mm-750g\" title=\"Ultimaker Black ABS Filament at Voxel Factory\" target=\"_blank\"\u003eABS\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-pla-2-85mm-750g\" title=\"UItimaker Black PLA Filament at Voxel Factory\" target=\"_blank\"\u003ePLA\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-nylon-2-85mm-750g\" title=\"Ultimaker Black Nylon Filament at Voxel Factory\" target=\"_blank\"\u003eNylon\u003c\/a\u003e, \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-cpe-2-85mm-750g\" title=\"Ultimaker Black CPE Filament at Voxel Factory\" target=\"_blank\"\u003eCPE\u003c\/a\u003e, or \u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-black-cpe-plus-2-85mm-700g\" title=\"Ultimaker Black CPE+ Filament at Voxel Factory\" target=\"_blank\"\u003eCPE+\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"480\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NmLf3kGsAbU\" frameborder=\"0\" gesture=\"media\" allow=\"encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBreakaway support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct vendor : \u003cstrong\u003eUltimaker\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter tolerance : \u003cstrong\u003e±0.10mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuantity :\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e750g\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800469972124\/Ultimaker-Breakaway-TDS-v2.00.pdf\" title=\"Ultimaker Breakaway Technical Data Sheet\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010201059\/SDS_Breakaway-EN.pdf\" title=\"Ultimaker Breakaway Safety Data Sheet\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003e3D Printing tips\u003c\/h5\u003e\n\u003cp\u003ePrint temp: \u003cstrong\u003eUse Cura profile\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNozzle: \u003cstrong\u003eAny size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrint speed: \u003cstrong\u003e30mm\/s to 300mm\/s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRetraction: \u003cstrong\u003eCheck your printer documentation!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHot print bed: \u003cstrong\u003e60°C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCold print bed: \u003cstrong\u003eYes\u003c\/strong\u003e (Use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" target=\"_blank\"\u003e3M #2090 blue painter's tape\u003c\/a\u003e for better adhesion)\u003c\/p\u003e\n\u003cp\u003ePost processing: \u003cstrong\u003e-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003eNot sure how to choose which support material to use for your print? Read the \u003ca href=\"https:\/\/ultimaker.com\/en\/blog\/52274-which-3d-printing-supports-to-use-pla-pva-or-breakaway\" title=\"Ultimaker Support Material Blog Post at Ultimaker.com\" target=\"_blank\"\u003eblog post\u003c\/a\u003e by Ultimaker regarding Breakaway, PVA, and building material support.\u003c\/p\u003e"}

{"id":9740138953,"title":"Ultimaker Soluble PVA 2.85mm 750g","handle":"ultimaker-pva-2-85mm-750g","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe recommended \u003cspan\u003ePVA\u003c\/span\u003e filament to use with your Ultimaker 3D printer. This water-soluble filament allows you to print removable supports with ease in a multi-extrusion setting. If your model features overhangs or cavities that are hard to print, try supporting them with PVA (polyvinyl alcohol), then watch the support dissolve in water. The Ultimaker PVA will adhere well to PLA and Nylon printing materials. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a \u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e at all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a \u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e and use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eNatural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4777282597020\/Ultimaker-PVA-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010208039\/SDS_PVA_v3.005-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-06-12T16:14:15-04:00","created_at":"2017-06-12T14:49:27-04:00","vendor":"Ultimaker","type":"Ultimaker Filaments","tags":["2.85mm","PVA","support","Ultimaker"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37726330889,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-PVA-285-CLR-750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Soluble PVA 2.85mm 750g","public_title":null,"options":["Default Title"],"price":15500,"weight":1300,"compare_at_price":null,"inventory_quantity":35,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374661","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-soluble-pva-2-85mm-750g-1_1400x_c4c14ff3-c23c-4488-9c74-56ec5edf1268.jpg?v=1642544839"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-soluble-pva-2-85mm-750g-1_1400x_c4c14ff3-c23c-4488-9c74-56ec5edf1268.jpg?v=1642544839","options":["Title"],"media":[{"alt":null,"id":29047648452844,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-soluble-pva-2-85mm-750g-1_1400x_c4c14ff3-c23c-4488-9c74-56ec5edf1268.jpg?v=1642544839"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-soluble-pva-2-85mm-750g-1_1400x_c4c14ff3-c23c-4488-9c74-56ec5edf1268.jpg?v=1642544839","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe recommended \u003cspan\u003ePVA\u003c\/span\u003e filament to use with your Ultimaker 3D printer. This water-soluble filament allows you to print removable supports with ease in a multi-extrusion setting. If your model features overhangs or cavities that are hard to print, try supporting them with PVA (polyvinyl alcohol), then watch the support dissolve in water. The Ultimaker PVA will adhere well to PLA and Nylon printing materials. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT - These filaments are extremely sensitive to moisture. If the filament is exposed to air for a long period of time during printing, there is a very high risk of decreasing the quality of the filament. It is therefore necessary to keep the filament in a \u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003edry storage box\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e at all times, even during printing. This box helps to preserve the integrity of the filament and protect it so that it retains its unique properties. Since this product can degrade easily, it is essential to obtain a \u003c\/b\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cb\u003efilament dehydrator\u003c\/b\u003e\u003c\/a\u003e\u003cb\u003e and use it to dry the filament before using it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor the dry storage box, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polybox?_pos=1\u0026amp;_sid=6f19c16bf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePolymaker PolyBox Edition II\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor a Filament dehydrator, we recommend the \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/printdry-filament-dryer-pro?_pos=3\u0026amp;_sid=55b13ddcf\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrintDry Filament Dryer Pro\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eNatural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4777282597020\/Ultimaker-PVA-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010208039\/SDS_PVA_v3.005-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":4169340026998,"title":"Ultimaker Black CPE+ 2.85mm 700g","handle":"ultimaker-black-cpe-plus-2-85mm-700g","description":"\u003cp\u003eThe recommended co-polyester filament to use with your Ultimaker 3D printer. Thanks to its chemical resistance and dimensional stability, CPE is a favorite for the creation of functional prototypes and mechanical parts. The Ultimaker CPE is tough, adheres well to itself during printing, and emits low levels of ultra-fine particles and volatile organic compounds (VOCs).\u003c\/p\u003e\n\u003cp\u003eCPE+ features similar properties compared to CPE, with the added advantage of higher temperature resistance and impact strength.\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eBlack\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800535847708\/Ultimaker-CPE-PLUS-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010204279\/SDS_CPE__v3.004-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e","published_at":"2019-10-02T10:01:28-04:00","created_at":"2019-10-02T10:01:28-04:00","vendor":"Ultimaker","type":"Ultimaker Filaments","tags":["2.85mm","black","CPE","Ultimaker"],"price":10900,"price_min":10900,"price_max":10900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30311994818678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-CPP-285-BLK-750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Black CPE+ 2.85mm 700g","public_title":null,"options":["Default Title"],"price":10900,"weight":1300,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8718836374913","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-black-cpe-2-85mm-700g-1_1400x_eb65e43b-ed22-46ce-bea5-1bfa6066b4ef.jpg?v=1642544937"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-black-cpe-2-85mm-700g-1_1400x_eb65e43b-ed22-46ce-bea5-1bfa6066b4ef.jpg?v=1642544937","options":["Title"],"media":[{"alt":null,"id":29047653761260,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-black-cpe-2-85mm-700g-1_1400x_eb65e43b-ed22-46ce-bea5-1bfa6066b4ef.jpg?v=1642544937"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-filaments-ultimaker-black-cpe-2-85mm-700g-1_1400x_eb65e43b-ed22-46ce-bea5-1bfa6066b4ef.jpg?v=1642544937","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe recommended co-polyester filament to use with your Ultimaker 3D printer. Thanks to its chemical resistance and dimensional stability, CPE is a favorite for the creation of functional prototypes and mechanical parts. The Ultimaker CPE is tough, adheres well to itself during printing, and emits low levels of ultra-fine particles and volatile organic compounds (VOCs).\u003c\/p\u003e\n\u003cp\u003eCPE+ features similar properties compared to CPE, with the added advantage of higher temperature resistance and impact strength.\u003c\/p\u003e\n\u003cp\u003eDiameter : \u003cstrong\u003e2.85mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColor : \u003cstrong\u003eBlack\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/article_attachments\/4800535847708\/Ultimaker-CPE-PLUS-TDS-v5.00.pdf\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ultimaker.com\/hc\/en-us\/article_attachments\/360010204279\/SDS_CPE__v3.004-en.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(.pdf)\u003c\/p\u003e\n\u003ch5\u003ePrinting Tips\u003c\/h5\u003e\n\u003cp\u003eCheck out the \u003ca title=\"Ultimaker Material Guides\" href=\"https:\/\/ultimaker.com\/en\/resources\/manuals\/materials\" target=\"_blank\"\u003eUltimaker guides\u003c\/a\u003e for the best practices with your Ultimaker filament!\u003c\/p\u003e\n\u003cp\u003ePrinting engineering materials on your Ultimaker 2+ or Ultimaker 3? Consider using the \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003eBed Adhesion Sheets\u003c\/a\u003e, \u003ca title=\"Ultimaker Bed Ahesion Sheets\" href=\"..\/..\/products\/ultimaker-bed-adhesion-sheets\" target=\"_blank\"\u003e\u003c\/a\u003ethe \u003ca title=\"Ultimaker Advanced 3D Printing Kit\" href=\"..\/..\/collections\/original-ultimaker-parts\/products\/advanced-3d-printing-kit-for-the-ultimaker-3\" target=\"_blank\"\u003eAdvanced 3D Printing Kit\u003c\/a\u003e or a full \u003ca title=\"Safety Enclosure for Ultimaker 3D Printers\" href=\"..\/..\/collections\/ultimaker-third-party-parts\/products\/ultimaker-safety-enclosure-kit\" target=\"_blank\"\u003esafety enclosure\u003c\/a\u003e for better results!\u003c\/p\u003e"}